ASTM D445 Petroleum Products Low Temperature Kinematic Viscosity Tester

Petroleum Products Low Temperature Kinematic Viscosity Tester

Product Model: JF265D

Product Introduction

This instrument is suitable for measuring low temperature viscosity of petroleum products. The mechanism of the instrument: At a certain constant temperature, the time for a certain volume of liquid to flow through a calibrated glass capillary viscometer under gravity is measured, and the product of the capillary constant of the viscometer and the flow time is the kinematic viscosity of the liquid measured at that temperature.

Technical Parameter

1. Applicable standards: ASTM D445, ISO3104, DIN51366, GB/T265

2. Temperature control method: PID digital temperature controller

3. Temperature control accuracy: Rt ～ -20±0.1℃

Or Rt ～ -40±0.1℃

4. Heating method: Electric heating tube heating

5. Refrigeration method: Compressor refrigeration

6. Working unit: 2 tubes

7. Working power supply: AC220V/50Hz

8. Machine power: 2500W

9. Instrument size: 490*470*520mm

10. Net weight: 50KG

11. HS Code: 9027899090

Features

1. The Dewar bottle is used as the bath body for transparent observation;

2. One-piece structure, easy to operate;

3. Vacuum Dewar bottle insulation, inner cylinder Φ150×300mm;

4. Two samples can be tested at the same time, which is convenient for parallel samples;

5. High-power solid-state relay control output, no voltage leakage;

6. There is a stirrer on the electronic heating bath;

7. Stainless steel heater;

8. The thermostat displays the heating status;

9. The shell is made of high-quality cold-rolled steel plate, and the surface is treated with electrostatic spray, which has good rust resistance and is easy to clean;

10. Safety facilities to prevent overheating and low water level;

11. It is very convenient to contact the control box.

1. Q: What services are supported? 

A: Free lifetime online technical services are supported.   

2.Q: How long is the warranty period of the equipment sold? 

A: The warranty is for twelve months 

3.Q: How long is the delivery time? 

A: Within 3 working days after receiving the down payment for the products in stock, and the specific delivery time depends on the order quantity and products.   

4.Q: What is the minimum order quantity? 

A: For the equipment, the minimum order quantity will be 1 set. For the lab parts, please contact us for final confirmation. 

5.Q: What’s your transportation? 

A: Express, air, sea transportation are supported, and appointed forwarders are also supported. 

6.Q: Do you accept customization service? Can I have my logo on the machine? 

A:Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.   

7.Q: How to install and use the product? 

A: Operating instructions or video will be sent to you online or by email. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use.  

8.Q: What’s the trade term and delivery term? 

A: Most of the common trade terms are supported, like CIF, FOB, CFR and so on . We have ordinary instruments in stock, the delivery time is 1-7 working days. If there are not in stock, the delivery time is 15-30 working days after the down payment.  If you are in urgent, we can consider making a special arrangement for you.