Riveting Gun

1. Driven by a servo motor, it does not require air and is not affected by changes in air pressure, resulting in more precise tension

2. Without sealing components and hydraulic oil, it is wear-resistant and will not frequently experience oil leakage, air leakage, or pressure loss. The maintenance frequency is significantly lower than that of pneumatic riveting guns, greatly reducing maintenance costs and minimizing downtime due to production line failures

3. The servo motor has strong durability, and the overall service life of the machine is more than twice that of a pneumatic riveting gun

4. The servo riveting gun has high integration and simple maintenance. It is connected to the aviation plug-in controller and only has one power data cable, unlike the pneumatic riveting gun which divides the air path and circuit (data)

5. The tension coverage range is wider from 0-25KN

6. Higher displacement accuracy (0.02mm), pneumatic can generally only achieve 0.05mm

7. The tension displacement setting is more convenient and accurate, and the program is easy to use. You only need to input the corresponding parameters on the touch screen

8. The riveting speed can be adjusted, the tension scanning frequency is fast, and the tension can be maintained

9. The tension of the servo riveting gun will not decrease throughout its entire life cycle, and the tension will not be inferior to that of a new gun due to wear on the inner cavity

10. Standard bolt pull rod can be replaced, and the cost of the pull rod is low