Contact Platform Support
Help CenterElectric Angle Type Needle Valves for Alumina Digestion Flash Tanks
Related Products
-
Tank Bottom ValveUS$ 1 - 10000MOQ: 2 Sets -
Special Dome Valve for Ash Handling SystemUS$ 1 - 1000MOQ: 2 Pounds
-
Full Bore Welding Type Ball Valve for Power PlantUS$ 1 - 10000MOQ: 2 Pieces
-
Swing Type Quick Action Blind ValveUS$ 1 - 1000MOQ: 2 Pieces
-
Vessel Flush Valve With Pneumatic ActuatorUS$ 1 - 1000MOQ: 2 Pieces
High temperature, pressure tube digestion technology is widely used for alumina refining In the tube, turbulence of bauxite slurry flow allows for efficient heat transfer and short digestion time Hard to dissolve diasporic bauxite requires 9 pre-heating stages followed by 8 flashing stages before discharging in the dilution tank.Electric AngleType Needle Valves are designed especially for Alumina Digestion Flash Tanks.
Valve operating conditions is the following :
Installation position: between flash tanks in pressure digestion Function:
Control fluid pressure and flow rate
T = 140ºC - 280ºC and P = PN4.0MPa - 160MPa
Process fluid: slurry, aluminate solution, Na2O 220 g/l
erosive solid-liquid-gas 3-phase medium
Flow rate = 285 m3/h - 3503/h and Density = 1500kg/m3
Pressure drop: △P = 2.6 - 0.18MPa
Control range:30 : 1
Leakage:ANSI
Harsh operating conditions require valves to have special structural design of durable material and with good flow characteristics for accurate process control
Benefits
Structural improvements have doubled the lifetime and enhanced the control performance of angle type needle valves for alumina digestion flash tanks.
Installation reduces
digestion's operating cost.
Valve lifetime doubled
Less maintenance cost of digestion piping due to longer lifetime of the valve
Less repair of throttle orifice and jet.
Down time caused by orifice failure, erosion and replacement are avoided after installation of the angle need valve.
Angle control valve can be disconnected from the whole allowing testing of disc and seat. In operation, seat and disc are visible and quick-wear parts can be easily replaced.
Specification
Valve Size : 2"-16" DN50-DN400
Pressure : Class 150-Class 900 PN1.6-PN16
Valve body material : WCB
Connection method: Flange
Send Inquiry to This Supplier
You May Also Like
-
Cryogenic Globe Valve for Turbo Expander Inlet and Outlet LineUS$ 1 - 1000MOQ: 2 Pieces
-
Pneumatic Ceramic Lined Feeding Valve for Ash Handling SystemUS$ 1 - 1000MOQ: 2 Pieces
-
Rotating Ball Valve With Double Direction Metal SealingUS$ 300 - 100000MOQ: 1 Piece
-
Eccentric Semi-ball ValveUS$ 100 - 50000MOQ: 1 Piece
-
Slurry ValveUS$ 100 - 50000MOQ: 1 Piece
-
Dumping ValveUS$ 100 - 50000MOQ: 1 Piece
-
Special Tank Bottom Angle Valve For Coal SlurryUS$ 100 - 300MOQ: 1 Piece
-
Wedge Gate ValveUS$ 100 - 1000MOQ: 1 Piece
-
Bi-directional Sealing Butterfly ValveUS$ 300 - 2000000MOQ: 1 Piece
-
Globe ValveUS$ 100 - 100000MOQ: 1 Set
