Style Cast Iron Flange Adapter

SHORT DESCRIPTION

STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from gouges, indentations and deformities of any type for proper sealing. Refer to the installation instructions for complete information.

 •  Vic-Flange Adapters must be assembled so there is no interference with mating components.

PRODUCT DETAIL

Gasket: (specify choice1) 

Grade “M” Halogenated Butyl Halogenated Butyl (Brown color code). 

Temperature range –20°F to + 200°F/–29°C to +93°C. 

Specifically compounded to conform to ductile pipe surfaces. 

Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services.

UL classified in accordance with ANSI/ NSF 61 for cold +86°F/+30°C potable water service.

NOT RECOMMENDED FOR PETROLEUM SERVICES.

Grade “S” Nitrile (Red color code). 

Temperature range –20°F to +180°F/–29°C to +82°C. 

Specially compounded to conform to flanged ductile iron pipe. 

Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot dry air over + 140°F/+60°C) and water over +150°F/+66°C. 

STYLE Cast Iron FLANGE ADAPTER NOT RECOMMENDED FOR HOT WATER SERVICES. 

Services listed are General Service Guidelines only. flanged ductile iron fittings should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. 

Bolts/Nuts: (specify choice) 

Standard: Carbon oval steel neck track bolts meeting the mechanical property requirements of ASTM A449. 

Carbon steel heavy hex nuts meeting the mechanical property requirements of ASTM A563 Grade B. 

Track bolts and heavy hex nuts are zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II (metric).  

Optional: Bolts – Stainless steel, meeting the mechanical property requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts – Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2 (316 stainless steel), condition CW, with galling reducing coating.