Contact Platform Support
Help CenterGIRAFE CL 804 Multi Functional INDUSTRIAL MS SEALANT
Related Products
-
GIRAFE Acetoxy Acetic Silicone Sealant For AquariumUS$ 1.1 - 2.1MOQ: 1000 Pieces -
GIRAFE 928 Neutral Weatherproof Anti-Mildew SealantUS$ 1.1 - 2.12MOQ: 1000 Pieces
-
GIRAFE 918 Silicone Sealant For Large Plate GlassUS$ 1.1 - 2.12MOQ: 1000 Pieces
-
Accept Custom Order ms Sealant for Roofing Construction and MaintenanceUS$ 0.7 - 2MOQ: 1728 Pieces
-
China Factory Supplier Fireproof ms Sealant/ms Polymer SealantUS$ 2.2 - 4.9MOQ: 4000 Pieces
1. Product Features
l Neutral room temperature cure, odourless, solvent free, very low VOC, environmentally friendly.
l No pollution of the substrate, no corrosion of metal, glass, plastic and other materials, wide range of applications.
l Surface can be painted, rich colour matching, wet environment can be constructed.
l Excellent aging resistance, UV resistance, ozone resistance, high and low temperature resistance.
l Excellent electrical properties, no corrosion and no pollution to all kinds of electronic and electrical appliances, medical equipment, mechanical equipment, refrigeration equipment and so on.
2. Main Application
l Adhesive sealing and caulking of glass, metal, ceramics, stone and other substrates.
l Bonding, sealing and caulking of elevator bridges, automobile frames, electrical frames and equipment components.
l Bonding and sealing of interior decoration and other bonding and sealing applications suitable for this product.
l Caulking and sealing of joints in elevators, vehicles, ships, machinery, electrical appliances, wind power equipment components, ventilation and refrigeration equipment.
l Bonding and sealing of various construction materials, such as glass, aluminum, stainless steel, concrete, etc.
3. Technical Parameters
Series |
Test Items |
Standard Requirements |
Test Method |
|
1） |
Slump |
Vertical Placement（mm） |
≤3 |
GB/T 13477 |
Horizontal Placement |
No deformation |
GB/T 13477 |
||
2） |
Density (g/cm3) |
1.56±0.1 |
GB/T 13477 |
|
3) |
Tack-free Time（min） |
≤50 |
GB/T 13477 |
|
4) |
Tensile Strength (Mpa) |
>0.1 |
GB/T 528 |
|
5) |
Elongation at break(%) |
>150 |
GB/T 528 |
|
6) |
Hardness Shore A |
45±5 |
GB/T 1741 |
|
7） |
volume resistivity (W.cm)
|
≥1.5×10 14
|
GB/T 1692 |
|
8) |
Dielectric Strength(KV/mm) |
≥20 |
GB/T 1692 |
|
4、 Usage
● The best environmental conditions for the construction of the sealant are temperature 4 ℃ ~ 40 ℃, relative humidity of 40% ~ 80%.
● Clean the surface of adhered or coated objects before use, and use suitable solvents including anhydrous alcohol, isopropyl alcohol, acetone and so on.
Remove rust, dust, oil and water.
● Cut the nozzle with a paper cutter, squeeze the adhesive onto the cleaned surface, make it evenly distributed, and close the sticky surface and fix it within the surface drying time.
Put the coated parts in the air and let them cure at room temperature for 24 hours before putting them into use.
● After the operation is completed, the unused adhesive should be tightened the cap immediately, sealed and stored. When using again, if there is a little crust at the sealing place, it can be removed without affecting the normal use.
5.Packing
300ml/cartridge, 24PCS/Carton; 590ml/sausage, 20PCS/Carton
6.Storage
Keep in a cool and dry environment below 27℃, the shelf life of the product is 9 months after the date of production, the product can be handled and transported in accordance with the general chemical products.
The product can be handled and transported according to general chemicals.
7. Precautions
● Store away from children.
● In case of inadvertent contact with skin, wipe clean and rinse with water immediately. In case of accidental contact with eyes, flush with water immediately and go to a hospital for examination.
● It is recommended that the product be used in a well-ventilated area.
Users are advised to understand the product and its properties in detail and conduct compatibility tests before using the product. Due to the diversity of practical applications, we do not guarantee that the product will be used under certain conditions.
Due to the diversity of practical applications, our company does not guarantee any problems arising from the use of our products under certain conditions, and does not assume any responsibility for direct, indirect or accidental damages. Users
Users encounter any problems in the use of the process, you can maintain communication with our engineers, we will try our best to provide you with the best product application solutions.
Solutions.
Send Inquiry to This Supplier
You May Also Like
-
Kafuter Polyurethane MS SealantUS$ 5 - 7MOQ: 200 Pieces
-
MS-C High Competitive Price MS Polymer SealantUS$ 0.9 - 2MOQ: 2000 Pieces
-
Ms Sealant Indifferent High And Low Temperature Resistant Silicone Sealant For AutomotiveUS$ 0.59 - 0.98MOQ: 2000 Pieces
-
GIRAFE CL 804 Multi Functional INDUSTRIAL MS SEALANTUS$ 1.1 - 2.12MOQ: 1000 Pieces
-
Nontoxic Super High Quality Bonding Ms Sealant Liquid Nail GlueUS$ 0.05 - 0.15MOQ: 1000 Pieces
-
Silicone Sealant LineUS$ 10000 - 40000MOQ: 1 Set
-
Silicone Sealant, Ms, PU Sealant Mixer Gantry Type Double Planetary Mixer With DisperserUS$ 78000 - 80000MOQ: 1 Combo
-
Silicone Sealant, Ms, PU Sealant Mixer Gantry Type YINYAN Double Planetary Mixer With DisperserUS$ 9999 - 10000MOQ: 1 Set
-
MS Polymer ProfessionalUS$ 1.3 - 2.1MOQ: 2400 Pieces
-
Fast Curing Waterproof ms Sealant/ms Polymer Sealant for Train UsageUS$ 2.2 - 4.9MOQ: 4000 Pieces
