Contact Platform Support
Help CenterMetal Pendulum Testing Machine
Related Products
-
Metal Drop Hammer Impact Testing Machine2000J-6000JCNY 60000 - 200000MOQ: 1 Unit -
High-precision Material Detection Tensile Testing Machine-Single Column Machine10N-20KNNegotiableMOQ: 1 Unit
-
High-precision Material Detection Tensile Testing Machine10N-50KNCNY 30000 - 200000MOQ: 1 Unit
-
Electronic Tensile Testing Machine 500KN-1000KNCNY 30000 - 300000MOQ: 1 Unit
-
High -precision Electronic Universal Testing Machine 50KN-150KNCNY 100000 - 300000MOQ: 1 Unit
Functional purpose:
With double-arm design, it is an instrument for testing the impact resistance of metalmaterials under dynamic load, which can continuously and massively carry out metalimpact tests, and display the impact absorption work, impact toughness, rotation angleof pendulum and print test reports
Performance features:
1,the main frame and base integrated design casting processing, column symmetrical front and rear, swing shaft support by simple support beam. It has high stability, good rigidity, simple and reliable structure.
2. Circular swing design, with minimum wind resistance. The impact knife adopts screw fastening wedge-shaped block to press and install, which is convenient and
3. the hanging device adopts hydraulic buffer design, which avoids the impact of hanging simple to replace. And the possible damage to the equipment, effectively reduces the noise during hanging, extends the service life of the equipment and improves the safety.
4. Adopt standard double-stage reducer transmission, simple structure, convenient assembly and maintenance, long service life, low failure rate.
5. with sample recovery device, waste samples can be taken out of the testing machine after impact, which not only improves work efficiency, but also improves operation safety.
6. It is equipped with a fully enclosed protective net, which can effectively prevent the splashing of broken samples, and also prevent the test personnel from entering the inner part of the testing machine during the test, so as to ensure the safety of the test
7. The equipment uses the German SIEMENS PLC to design the control system. High precision rotary encoder is used to obtain the real-time position of the pendulum. The system has strong anti-interference ability, reliable, stable and accurate data
8. Automatic sampling delivery system can be selected, which can greatly improve the test efficiency and reduce the labor intensity
Technical parameters |
CT series liquid crystal |
CT series microcomputer type |
model |
CT150S-A，CT300S-A，CT450S-A，CT600S-A,CT750S-A |
CT150S-B，CT300S-B，CT450S-B，CT600S-B,CT750S-B |
Specification |
150J，300J，450J，600J，750J |
150J，300J，450J，600J，750J |
Measurement parameters |
||
Measuring range |
10%-100%FS |
|
resolution |
0.1J |
|
Pre-lift angle |
150° |
|
Striking center distance |
750mm |
750mm |
Impact velocity |
5.24m/s |
5.24m/s |
Host parameters |
||
Host power supply |
1.5kW，380V，50HZ |
1.5KW，380V，50HZ |
Host size |
(5000*2000*6000)mm |
(5500*2500*6500)mm |
Weight of the main engine |
900kg |
900kg |
Send Inquiry to This Supplier
You May Also Like
-
Electronic Universal Testing Machine/Material Tensile Testing Machine/200KN-300KNCNY 100000 - 300000MOQ: 1 Unit
-
Electronic Universal Testing Machine/Double Column Machine10N-20KNCNY 60000 - 140000MOQ: 1 Unit
-
Special Testing Machine for Bending and Compression Resistance 10N-300KNCNY 12000 - 120000MOQ: 1 Unit
-
High and Low Temperature 10N-300KNCNY 20000 - 200000MOQ: 1 Unit
-
Special Testing Machine -50N-300KNCNY 60000 - 200000MOQ: 1 Unit
-
Electronic Universal Testing Machine10KN-100KNNegotiableMOQ: 1 Unit
-
Electronic Torsion Testing Machine20NM-200NMCNY 12000 - 100000MOQ: 1 Unit
-
Torsion Testing Machine -Floor Standing500NM-5000NMCNY 12000 - 100000MOQ: 1 Unit
-
Fastener Pull Button Testing Machine20NM-2000NMCNY 20000 - 140000MOQ: 1 Unit
-
Electronic Universal Testing Machine-Electric Pull Main Control BordCNY 10000 - 20000MOQ: 1 Unit
