Contact Platform Support
Help CenterNJbinglab PFA Acid Purification System for PerkinElmer ICP-MS, Small Footprint
Related Products
-
NJbinglab Anti-Corrosion Hot Plate for Stable Isotope Analysis, 400*300mmUS$ 700 - 700MOQ: 1 Piece -
NJbinglab PFA Acid Purification System 1L, Acid Production Rate 50ml per HourUS$ 6570 - 6570MOQ: 1 Piece
-
NJbinglab Graphite Digestion System, for Determination of Base Metal Impurity Content in Electronic Grade PolysiliconUS$ 1667 - 1667MOQ: 1 Unit
-
NJbinglab PFA Acid Purifiction System, Sub-boiling Distillation, Reduce Reagent CostsUS$ 6570 - 6570MOQ: 1 Piece
-
NJbinglab Hole Type Digestion Device, Surface Sprayed With PFA Coating, Made to OrderUS$ 1667 - 1667MOQ: 1 Unit
PFA purification system:
1. Product introduction:
Acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, the purity of the acid is often poor, causing deviations and errors in the analysis results. Commercially available pure acids are often expensive and difficult to meet the large demand for acids in daily analyses. Therefore, purifying and optimizing the quality of acid is an economically feasible way. Our acid purifier can be used in laboratories to purify HNO3, HCl, HF, alkali solutions and organic solvents. After purification, the purity of the acid is further improved. Later in the experiment, our unit's Teflon series reagent bottles can be used to collect high-purity acid.
2. Working principle:
The acid purifier uses the principle of thermal radiation to keep the liquid temperature below the boiling point to evaporate, and then condenses the acid vapor to prepare high-purity water and high-purity reagents. It is widely used in sample processing and analysis experiments.
3. Product features:
1. It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. All containers used are made of Teflon corrosion-resistant non-adsorption plastic and can handle laboratories such as HNO3, HCl, HF, etc. Commonly used acids.
2. Experiments have proven that after a single distillation of an acid with a metal impurity content of about 10 ppb, the metal impurity content can be reduced to about 0.01 ppb. If the acid requirements are higher, the purification times can be increased.
web:
Phone/Whatsapp/ Wechat :+8615805176994
Mail: rossnjbzh@gmail.com / rossg@njbinglab.com
Send Inquiry to This Supplier
You May Also Like
-
NJbinglab Graphite Hot Block, With High Temperature Control AccuracyUS$ 1667 - 1667MOQ: 1 Unit
-
Corrosion-resistant Hot Plate for Trace Element Analysis, no Exposed Metal ElementsUS$ 833 - 1000MOQ: 1 Piece
-
Graphite Hot Block, Used in Wet Digestion Experiments, With PFA Anti-corrosion CoatingUS$ 1632 - 2000MOQ: 1 Piece
-
Anti-corrosion Hot Plate for Fruit Sample Digestion, Split Design for Long Service LifeUS$ 620 - 1020MOQ: 3 Pieces
-
Graphite Hot Block, Uniformly Heated, With Customizable Pore Size, Depth, and Number of HolesUS$ 1281 - 1281MOQ: 3 Pieces
-
Versatile Anti-Corrosion Hot Plate for Various Industrial UsesUS$ 625 - 625MOQ: 1 Piece
-
Graphite Acid Remover, Which Can be Used to Evaporate Excess Acid After Microwave Digestion, Can be Equipped With CEM Inner TubeUS$ 1667 - 1667MOQ: 1 Unit
-
Graphite Digestion System With PFA Digestion Tube for Digestion and Analysis of Heavy Metal Elements in Food, Soil and Lithium BatteriesUS$ 1281 - 1281MOQ: 3 Pieces
-
NJbinglab PFA Distillation Filtration Reflux Apparatus, Support CustomizationUS$ 4270 - 4270MOQ: 1 Set
-
NJbinglab PTFE Multi-stage Filter, Easy to Disassemble and CleanUS$ 350 - 350MOQ: 1 Set
