HOPERF Protocol 5.0 Bluetooth Low Energy (BLE) System on Chip CMT4502
Description:
CMT4502 is a low-power consumption IoT Bluetooth wireless communication chip with 32-bit ARM?Cortex?-M0 CPU and 138K SRAM/Retention SRAM, featuring low power consumption, high performance, and wireless multi-mode to support BLE functions for security, applications, and wireless updates. Also, its serial peripheral IO and integrated application IP will give customers a low-cost advantage.
The CMT4502 supports BLE5.0 high-speed data throughput, including BLE 2Mbps protocol and length extension; it supports multiple features of the Bluetooth Sig-Mesh protocol: Friend/LowPower/ProxyRelay nodes, and is capable of providing full protocol feature support for BLE5.0.
Features:
ARM® Cortex™-M0 32-bit Processor
- Memory
512KB System Flash
128KB ROM
➢ 138KB SRAM, all data constant in sleep mode
Holding ➢ 8-channel DMA
8-channel DMA
- RC oscillator hardware calibration
32KHz RC RTC oscillator auto-calibration
Accuracy ±500ppm
32MHz RC HCLK oscillator auto-calibration
3% accuracy
- High Speed Data Throughput
- 33/19 General Purpose I/O Pins
All pins can be configured for serial interface and editable IO MUX function mapping.
IO MUX function mapping
All pins can be configured for wake-up states.
A total of 18 pins can trigger interrupts.
3 QDEC decoders
6-channel PWM
2-channel PDM
2-channel I2C
2-channel SPI
➢ 1 Channel UART
JTAG
- Support DMIC/AMIC microphone function
- 3/8-channel 12-bit ADC with low noise PGA support
- 4-channel 24-bit clock, 1 monitor clock
- Real Time Counter (RTC)
- Power supply, clock reset controller
- Flexible power management
➢ Supply voltage range: 1.8V-3.6V
➢ Embedded step-down DC-DCs
Embedded LDOs
Power monitor: supports low battery detection
- Energy Power Consumption
➢ Sleep mode, power flow through IO wake-up only:
0.7uA
Energy power consumption ➢ Sleep mode, wake-up only by IO: 0.7uA ➢ Sleep mode, wake-up by 32KHz RTC: 2uA
Power consumption ➢ Sleep mode, wake-up only via IO: 0.7uA
RX mode, system peak current 6.7mA
➢ TX 0dBm transmit power, system peak current is
6.7mA
Supports BLE 2Mbps protocol.
Supports Data Length Expansion (DLE) function.
➢ Maximum data throughput up to 1.6Mbps (DLE+2Mbps)
- Supports multiple features of SIG-Mesh
Friend node
Friend nodes ➢ LowPower nodes
Proxy node ➢ Friend node ➢ LowPower node
Relay nodes
- 2.4 GHz Transceiver
➢ Supports BLE5.0 RF PHY 1Mbps/2Mbps
➢ Receive sensitivity:
BLE 1Mbps Data Rate: -97dBm
Transmit power: -20dBm to 10dBm, 3dBm steps
Single pin antenna: no RF matching or RX/TX switching required
RSSI: 1dB resolution
- AES-128 hardware encryption
- Operating Temperature: -40°C ~ 85°C
- RoHS Package: QFN32/QFN48
- Application Scenario:Smart wearable devices, Bluetooth indoor navigation, smart
Smart Home, Smart Building, Healthcare, Sports & Fitness, Intelligent Industry, Retail & Payment, Information Security, Information Technology
Industry, retail payment, information security, data transmission, remote control,
personal peripherals, and Internet of Things (IoT).
Send Inquiry to This Supplier
You May Also Like
-
HOPERF 315/433/868/915 MHz Single-chip OOK Transmitter With Encoder CMT2157LNegotiableMOQ: 3000 Units
-
HOPERF 240 – 960 MHz SoC (G)FSK/OOK Transmitter CMT2189CNegotiableMOQ: 3000 Units
-
HOPERF 240-960MHz Flash-based OOK Transmitter SoC CMT2189BNegotiableMOQ: 3000 Units
-
HOPERF Sub-1GHz Wireless Transceiver Microcontroller CMT2380F64NegotiableMOQ: 3000 Units
-
HOPERF Sub-1GHz Wireless Transceiver Microcontroller CMT2390F64NegotiableMOQ: 3000 Units
-
HOPERF WiFi Module HM-WF8720NegotiableMOQ: 3000 Units
-
HOPERF Low Power High Performance 2.4 GHz GFSK Transceiver RFM75NegotiableMOQ: 3000 Units
-
HOPERF Matter Over WiFi Module HM-MT5801NegotiableMOQ: 3000 Units
-
HOPERF Low Power High Performance 2.4 GHz GFSK Transceiver RFM75(C)-S3NegotiableMOQ: 3000 Units
-
HOPERF Bluetooth 5.2 / IEEE 802.15.4 System on Chip CMT4522NegotiableMOQ: 3000 Units