HOPERF PRECISION BAROMETER AND ALTIMETER SENSOR HP5834

Descriptions

 The HP5834 employs a MEMS pressure sensor with an I2C interface to provide accurate Temperature, Pressure data. The sensor Pressure and Temperature outputs are digitized by a high resolution 24-bit ADC. The Altitude value is calculated by a specific patented algorithm according to the pressure and temperature data. Data compensation is integrated internally to save the effort of the external host MCU system. Easy command-based data acquisition interface and programmable interrupt control is available. Typical active supply current is 5.3uA per measurement-second while the ADC output is filtered and decimated by 256. Pressure output can be resolved with output in fractions of a Pascal.

Features

 Operation temperature: -40~85℃ 

 Supply voltage: 1.8V to 3.6V 

 Pressure range: 0mBar ~2000mBar 

 Programmable events and interrupt controls 

 High-speed I2C digital output interface (Up to 10 MHz) 

 Fast conversion down to 2ms 

 Standby current <0.1uA, low conversion power, 2uA at 1 sample/sec. 

 Water proof design can use in 100m 

 Hermetically sealable for outdoor devices 

 Sealing designed for 2.8 x 0.8mm O-ring