Car Paint Ultrasonic Thickness Gauge Portable Coating Thickness Gauge

CM10FN galvanized coating thickness gauge

Feature and Description

Magnetic induction principle (Fe): measuring steel, iron and other ferromagnetic metal substrate on the non-magnetic 

coating thickness, such as paint layer, all kinds of anti-corrosion coating, paint, powder coating, plastic, rubber, 

synthetic materials, Chromium, zinc, lead, aluminum, tin, cadmium and so on.

Eddy current principle (NFe): measurement of copper, aluminum, stainless steel and other non-ferromagnetic nature 

of all non-conductive layer thickness, such as paint layer, all kinds of anti-corrosion coating, paint, powder coating, 

plastic, rubber, synthetic materials, , Phosphating film and so on.

Standard Configuration

Technical data

Model comparison

Model:CM10F 

Application:

CM10F adopt magnetic measuring method to measure the thickness of non-magnetic coatings on magnetic metal

substrates.Widely used in electronics, power plants, petrochemical industry.,aviation, architecture,etc

Specification

Measuring Principle:Magnetic Method .

Measuring Principle (um) :P1(0~3000)

Low Range Sensitivity(um) :0.1

Tolerance:1-Point Calibration(um) :±(2%H+2) 

2-Point Calibration(um) :±((1~3)%H+1) 

Testing Condition:Min. Curvature Radius(mm):1.5 

Min. Measuring Surface(mm): 7

Min. Substrate Thickness(mm): 0.5

Display:High Contrast Segment Liquid(LED Backlight)

Statistics:N,MAX,MIN,MEAN and STD.DEV

Calibration:One-Point Calibration and Two-Point Calibration

Working Temperature:-10℃~+50℃,-20℃ in special requirement.

Auto Power-off:Auto off after 3 minutes of inactivity.

Power:Two 1.5V  AA batteries,low -voltage indication function.

Weight:200g including batteries

Size:149mm×73mm×32mm (H×W×D)

Model:CM10N 

Application:

Using Eddy Current Measuring Method to measure the thickness of non-conductive coatings on non-magnetic 

metal substrates. The Max. measuring range to 2000μm

Parameters:

Measuring Principle:Eddy Current Method

Measuring Range (um) :0~2000

Low Range Sensitivity (um) : 0.1

Tolerance:(um)  ±(2%H+2)  

Testing Condition:(mm): 3

Min. Measuring Suface(mm):5

min.Substrate Thickness(mm):  0.3

Display:Hight contrast Segment Liquid(LED backlight)

Statitics:N,MAX,MIN,MEAN,STD.DEV

Calibration:1-point Calibration,2-point Calibration

Working Temperature:-10℃~+50℃,-20℃ in special requirement

Auto Power-off:Auto off after 3 minutes of inactivity

Power:2 1.5V  AA batteries,low-voltage indication function

Weight:200g including batteries

Size:149mm×73mm×32mm (H×W×D)

Model:CM10FH

Application:

Using the Magnetic Method (Fe) for Measuring the thickness of non- magnetic coatings on steel, iron and other 

ferromagnetic metal substrates. Measuring Range is 0-10000μm.

Parameters:

Measuring  Principle:Magnetic Method 

Measuring Range (um) :(0~10000)

Low Range Sensitivity (um) :10

Tolerance::±(2%H+10)  

Testing Condition:Min. Curvature Radius(mm):10

Min. Measuring Surface(mm): 40

Min. Suibstrate Thickness(mm): 2

Display:Hight Contrast Segment Liquid Crystal Display(LED Backlight)

Statistics:N,MAX,MIN,MEAN,STD.DEV

Calibration:One-point Calibration,Two-point Calibration

Working Temperature:-10℃~+50℃,-20℃ in special requirement

Auto Power-off:3Auto off after 3 minutes of inactivity

Power:Two 1.5V  AA batteries,low-voltage indication function

Weight:200g including batteries

Size:149mm×73mm×32mm (H×W×D)

Model:CM10FN

Application:

This compact and handy pocket gauge has been designed for non-destructive, fast and precise coating thickness 

measurement. Fit for both experiment and project site. According to the probe type, the gauge work either on the 

magnetic induction principle or on the eddy currents principle

Parameters:

Working principle:P1 Magnetic Method ,P2 Eddy Current Method,

Measuring Range(um) :P1(0~3000),  P2(0~2000),  )

Low range sensitivity (um) :0.1( P1), 0.1(P2),

Tolerance:

One-point Calibration(um) :±(2%H+2) P1, ±(2%H+2)P2,  

Two-point Calibration(um) :±((1~3)%H+1) P1, ±((1~3)%H+1.5)P2,

Testing Condition:

Min.Curvature Radius(mm):1.5 ( P1), 3(P2), 10(P3), 1(P4)

Min.Measuring Surface(mm): 7( P1), 5(P2), 40(P3), 3(P4)

Min.Substrate Thickness(mm): 0.5( P1), 0.3(P2), 2(P3), 0.2(P4)

Display:   High Contrast Segment Liquid Crystal Display (LED Backlight)

Statistics:   N, MAX, MIN, MEAN and STD.DEV

Calibration:  One-point Calibration,Two-point Calibration

Auto Power-off: Auto off after 3 minutes of inactivity;

Power:    2AA 1.5V  batteries,low-voltage indication function

Weight:   200g including batteries.

Size: 149mm×73mm×32mm (H×W×D)