KR-260 Acid Detergent for RO Membrane
1. Suitable for all aromatic polyamide membranes.
2. Low froth formula.
3. Diluent pH 3.0-4.0.
4. Liquid chemicals, mix well.
5. Can be used repeatedly.
KR-260 is an acid liquid formula, it can remove metal hydroxide, calcium carbonate and other types of scales.
Dosage:Dilute to 1-3%(1:45)
Specification:| Items | Index |
|---|---|
| Appearance | Colorless to pale yellow transparent liquid |
| pH (1% water solution) | 2.0-3.0 |
| Density (20℃), g/cm3 | 1.05min |
| Storage temperature | Not lower than -10℃ |
(1)Check water box, pipeline and filter, change the filter material if needed.
(2)Input q.v. RO effluence to water box.
(3)Input q.v. KR-260 to water box, mix the solution with water pump, measure pH.
(4)Clean the system repeatedly, measure pH 5-20 minutes. After pH rise to 4, input q.v. KR-260 or acid, till pH not rise, meaning cleaning is end.
(5)If pollution is serious, sometimes the first batch detergent should be evacuated and the next batch should be required.
(6)Pay attention to solution temperature, don’t exceed the required temperature .
Package:200L plastic drum,IBC(1000L),customers’ requirement.
Send Inquiry to This Supplier
You May Also Like
-
KR-191 Antiscalant and Dispersant for RO MembraneUS$ 999 - 9999MOQ: 1 Ton
-
KRASD-200 Antiscalant and Dispersant for RO MembraneUS$ 999 - 9999MOQ: 1 Ton
-
KR-907 Non-P Scale & Corrosion InhibitorUS$ 999 - 9999MOQ: 1 Ton
-
KR-503 Scale and Corrosion Inhibitor for BoilerUS$ 999 - 9999MOQ: 1 Ton
-
KR-503B Scale and Corrosion Inhibitor for BoilerUS$ 999 - 9999MOQ: 1 Ton
-
KR-504 Scale and Corrosion Inhibitor for Heating WaterUS$ 999 - 9999MOQ: 1 Ton
-
KR-601 Scale and Corrosion Inhibitor for Iron & Steel PlantUS$ 999 - 9999MOQ: 1 Ton
-
KR-604 Scale and Corrosion Inhibitor for Power PlantUS$ 999 - 9999MOQ: 1 Ton
-
KR-607 Scale Inhibitor for Oilfield Refill WaterUS$ 999 - 9999MOQ: 1 Ton
-
KR-607B Manufacturer Scale Inhibitor for Barium and StrontiumUS$ 999 - 9999MOQ: 1 Ton