Constant Temperature and Humidity Incubator

Constant temperature and humidity incubator

Model: BJPX-HT250

Product Introduction:

The constant temperature and humidity incubator is used for sterile testing, stability inspection, and testing of raw material properties, product packaging, and product lifespan in pharmaceutical, textile, food processing, and other industrial products.

Widely used in medical institutions, pharmaceuticals, chemicals, environmental protection, agriculture, electrical and electronic, military equipment, and airborne equipment fields.

Product features:

1. Adopting a double-layer door structure, with a built-in tempered glass door, and an enlarged perspective window on the outer door for easier observation.

The 2.7.0 inch LCD touch screen is more convenient to operate, capable of real-time monitoring of temperature curves, and comes standard with a USB data interface.

3. Fully enclosed and efficient compressor, environmentally friendly refrigerant R134a, automatic defrosting switch between upper and lower plates of the evaporator, no need to stop defrosting.

4. Equipped with a built-in humidification system and imported humidity sensors for more precise control.

5. Use safer and more environmentally friendly polyurethane insulation board: moisture-proof, flame-retardant, and heat-resistant.

Technical parameters:

Nominal volume: 250L

Convection method: forced convection method

Humidity fluctuation: ± 3-5% RH

Humidity range: 50-95% RH

Temperature control range: 0-60 ℃

Temperature resolution: 0.1 ℃

Temperature fluctuation: ± 1.0 ℃

Temperature uniformity: ± 2.0 ℃ (@ 37 ℃)

Humidification method: built-in humidification tube

Refrigerant: R134a (fluorine free and environmentally friendly refrigerant)

Power supply: 220V ± 10%; 50Hz

Working environment: Suitable ambient temperature is 25 ℃ (10-30 ℃)

Display screen: 7-inch LCD touch screen

Attachment: USB/optional printer, optional UV/BOD socket

Observation window: Double door with observation window

Rated power: 1500 (W)

Studio size W x D x H (mm): 660 * 450 * 850

External dimensions W x D x H (mm): 802 * 743 * 1440

Load carrier (standard configuration): 2 pieces

Net weight: 135kg