IS220PDIOH1A GE General Electric Processor Module

The control net fiber optic repeater realizes the conversion of control net bus electrical signals to optical fibers, and is functionally compatible with AB's original 1786-RPA+1786-RPFM/RPFS/RPFRL/RPFRXL and other fiber optic modules.

Detailed introduction:

This series of products is a ControlNet protocol based fieldbus fiber optic repeater that supports fieldbuses based on the ControlNet protocol, with independent dual bus electrical interfaces and two fiber optic interfaces. It provides a redundant dual bus structure and fiber optic redundant ring network function, providing fiber optic redundant long-distance transmission and relay function for redundant dual network systems. Shenzhen Xunji Technology Co., Ltd. is an industrial network equipment provider, and the equipment adopts new technology, Take the lead in launching innovative products in the industry

This device has a unique dual electrical service and dual fiber optic interface design, supporting dual network redundancy and fiber optic ring network, as well as supporting point-to-point, star, chain bus, ring network, and hybrid network structures. Long distance transmission of fiber optic with a length of over 20km breaks through the distance limit of cable systems. The dual electrical service channel is logically independent and supports flexible combination of 1-2 optical/electrical interfaces. According to the actual needs of the project, it can achieve 1 fiber optic interface and 1 data interface; 1 fiber optic interface and 2 data interfaces; Two fiber optic interfaces and one data interface; Flexible configuration of 2-way fiber optic interface and 2-way data interface The Ci CF series is a universal product based on standard ControlNet, with a communication rate of 5M

The 155M dual optical interface can better support the outstanding advantages of the fiber optic transmission ControlNet bus, such as peer-to-peer transmission, burst data, bus arbitration, etc., while achieving high-speed long-distance transmission, electrical and ground wire isolation, and reducing interference. The product is industrial grade design, IP30 protection level, corrugated aluminum reinforced casing, 35mm rail installation, DC (9-36) V wide power input, and has relay alarm output Advantages such as dual power redundancy and isolation protection.

Power supply and protection:

*Power supply: Dual power redundant input, DC (9-30) V, typical DC24V, power consumption less than 1.5W, with DC1000V voltage isolation and reverse protection function, industrial terminal interface

*Relay alarm output: Fiber optic link fault and power supply fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

Mechanical characteristics:

*External dimensions: 132mm * 105mm * 52mm

*Shell: IP30 protection level, corrugated aluminum reinforced casing

*Installation method: 35mm guide rail installation

*Net weight: 800g

Work environment:

*Working temperature: -10-70 ℃ (-40~+85 ℃ wide temperature optional)

*Relative humidity: ≤ 90% (non condensing)

*Storage temperature: -40~80 ℃

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com   386353502@qq.com

Official website: