3BSE056797R1 Interface

Relay: Contact switch output, contact capacity 220VAC/2A or 24VDC/2A.

S S R drive: The drive voltage is 12VDC/30mA (used to drive SSR solid-state relays).

Communication transmission output: 4-20mA, 1-5V, Rs485 communication

Accuracy: ± 0.2% F.S ± 1 word, automatically compensating for temperature drift and time drift

Current output load capacity: 0-600 Ω or 0-250 Ω

Measurement control cycle: 0.5s;

Power distribution output: DC24 ± 1V (25mA)

Isolator isolation voltage: input output: 1500V, input power supply, output power supply: 1000V

Working environment: temperature, 0-50 ℃; Relative humidity ≤ 80% RH

Power supply: Switching power supply 100-240VAC (50HZ/60HZ), 24VDC/AC ± 2V Power consumption: ≤ 2W

Appearance color: green

Installation size: 100 × one hundred and twelve × 45 (22.5) mm installation method: DIN35 guide rail

● Control station (FCS-2000) can reach up to 30 stations

● Up to 16 I/O NODE/control stations

8 I/O modules/NODE

Maximum practical installation of 4096 DI/O points or 2048 AIO points

● The operating station (XOS) can reach up to 16 stations

● Database Station (XDS) 1 Station Duplication

Engineer Station (XES) can reach up to 4 stations

● Remote operation station (R-XOS) can reach up to 4 stations

64 bit microprocessor

High reliability dual architecture:

Controllers, power supplies, control networks, I/O modules... etc

Fast master-slave switching (<100 ms)

Quick initialization (USB RECOVERY)

High performance I/O card

Advantages of upgrading and replacing DCS systems

1. Control the conversion of program files to a new system:

There is no need to rewrite the program and conduct testing, ensuring that

Ensuring accuracy and reducing on-site adjustment time, etc

2. Experience in updating multiple brand DCS:

WH, Bailey, YOKOGAWA, Moore et al

3. Design IO conversion module to ensure the alignment of the distribution line

Accuracy, shortening the replacement time:

Connect the new IO conversion module using the original inter disk cable

4. Space saving:

Use the installation space of the old IO disk to install a new IO disk

5. Diversified construction risks:

Wrong wiring and knot in the tray, fully verified before shipment

6. Low construction risk update:

No need for complex graphics, after removing the movable terminal