Contact Platform Support
Help CenterAnti-Soluble Foam Extinguishing Agent 6% S/Ar
Related Products
-
6% Water-Forming Foam Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton -
Fluoride Foam Extinguishing Agent 6%US$ 100 - 2000MOQ: 1 Ton
-
Good Quality Firefighting Powder ABC Dry Powder Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
ABC Dry Powder Fire Extinguishing Agent Abc Dry PowderUS$ 100 - 2000MOQ: 1 Ton
-
High-Quality ABC (ammonium Phosphate) Powder Extinguishing Agent/Abc Dry PowderUS$ 100 - 2000MOQ: 1 Ton
Anti-soluble foam extinguishing agent 6% S/AR
6% type of anti-soluble foam Fire Extinguishing Agent is a highly efficient environmentally friendly fire extinguishing agent. Its characteristic is that the formed foam can form a protective film on the surface of the polar liquid fuel, and the film can protect the upper foam from being damaged and thus play a role of fire extinguishing. It can not only extinguish the polar liquid fuel fire, but also extinguish the oil fuel fire. The product extinguishes the fire extinguishing level ⅢC of nonpolar solvent fire and ARⅠB fire extinguishing solvent fire. So it has a multi-functional nature.
Executive Standard Number: GB15308-2006 “foam fire extinguishing agent“
project |
Technical indicators |
Exterior |
Light yellow paste |
Proportion(20℃),g/cm3 |
1.01-1.10 |
PH(20℃) |
6-9.5 |
Anti-freezing, melting performance |
No visible stratification and heterogeneity |
Fluidity |
Flow is greater than the standard reference solution |
Foaming multiple |
The deviation from the eigenvalue is not greater than 1.0 or not greater than the eigenvalue 20% |
25%drainage time.min |
Deviation from the characteristic value is not more than 20% |
Extinguishing time (acetone), min |
≤3 |
Anti-burning time (acetone), min |
≥10 |
Extinguishing time (120 # solvent oil), min |
Strong cast ≤ 3, slow cast ≤ 5 |
Anti-burning time (120 # solvent oil), min |
Slow release ≥ 10 |
Freezing point, ℃ |
Within eigenvalue – 4 º |
Operating temperature, ℃ |
Freezing point +5 ~ 40 |
The fire extinguishing agent can be used in a variety of low-foaming fire extinguishing system and fresh water by 6:94 ratio foam mixing fire. Widely used in large chemical plants, chemical fiber plants, oil companies, chemical products warehouse fire and other areas of protection.This product is stable, non-toxic, non-corrosive, such as splashed into the eyes or skin, wash with water.
This fire-extinguishing agent stock solution should be stored at ambient temperature below 45 ° C and above its minimum service temperature. The product is sealed and stored in the above environment for a period of two years.
Looking for ideal Foam Extinguishing Agent Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Anti-soluble Foam Extinguishing Agent are quality guaranteed. We are China Origin Factory of Types of Foam Extinguishing Agents. If you have any question, please feel free to contact us.
Product Categories : Firefighting Powder
Product Images
Send Inquiry to This Supplier
You May Also Like
-
Hot Selling ABC Ultra-fine Powder Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
6% Fluoride Foam Fire Extinguishing Agent Abc Dry PowderUS$ 100 - 2000MOQ: 1 Ton
-
Fire Extinguishing Agent ABC Dry Powder Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
Flame Retardant ABC Dry Powder Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
Efficient and Environmentally Friendly Foam Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
ABC (ammonium Phosphate) Powder Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
ABC Ultra-fine Powder Fire Extinguishing AgentUS$ 100 - 2000MOQ: 1 Ton
-
Foam Fire Extinguishing Agent Abc Dry PowderUS$ 100 - 2000MOQ: 1 Ton
-
Fluoride Foam Extinguishing Agent 6%US$ 100 - 2000MOQ: 1 Ton
-
6% Fluoride Foam Fire Extinguishing Agent Abc Dry PowderUS$ 100 - 2000MOQ: 1 Ton
