Hengyang Heavy Industry Electric Hydraulic Arm Disk Brake YPZ2 | -630/50 Built in Spring

Usage conditions:

Environmental temperature -20 ℃~+50 ℃;

The relative humidity of the air shall not exceed 90%;

Generally used for three-phase AC power supply 50Hz, 380V (60Hz or different voltages can also be produced according to needs, please specify when ordering); The altitude meets the GB755-2000 standard. When the temperature is below -20 ℃, the working oil of the thruster should be changed to YH-10 aviation hydraulic oil or equipped with a heater as required. Please refer to the Ed thruster sample for details.

Outdoor rain and snow erosion or corrosive gases and media should be corrosion-resistant products.

YPZ2 electric hydraulic arm disc brake is an indispensable part of stage machinery, and braking devices are required for vertical lifting equipment, horizontal walking equipment and even rotating equipment. It is both a control device and a safety device. The essence of the brake's work is to generate a braking effect through the friction of the friction pair.

YPZ2 electric hydraulic arm disc brake is an indispensable part of stage machinery, and braking devices are required for vertical lifting equipment, horizontal walking equipment and even rotating equipment. It is both a control device and a safety device. The essence of the brake's work is to generate a braking effect through the friction of the friction pair. According to work needs, or by converting kinetic energy into frictional heat energy consumption, the mechanism stops moving; Or balance the external force through Stiction to keep the mechanism in its original static state. YPZ2 electro-hydraulic arm disc brake

Common brakes can be divided into block type, belt type and disc type according to their structure; Divided into two types according to working status: normally closed and normally open; According to the control system, it is divided into electromagnetic brake, hydraulic electromagnetic brake, and hydraulic push rod brake.