HUADA/HAWKER LPC100-48 Charging Station

HUADA/HAWKER LPC100-48 Charging Station

HUADA/HAWKER LPC100-48 Charging Station

HUADA/HAWKER LPC100-48 Charging Station

Hawker LPC Intelligent Charging Station

Product features: This product is designed for applications such as automatic guided vehicles/electric forklifts.

The product is composed of basic power modules N+1 in parallel, which can meet the maximum power application of 24V240A/48V200A.

The entire machine adopts a controller specifically developed for the application requirements of AGV cars in automatic production lines,

Realize logic control, system protection, parameter setting, charger management, upper communication and other functions, and use a 7-inch full color touch screen to achieve human-computer interaction.

The system has the following characteristic functions:

Ultra high power, 240A@24V / 200A@48V

Hot swappable mode, N+1 redundant structure protection

Ultra high power density and compact volume

Support current expansion and upgrading

Standard efficiency up to 92%

Multiple usage modes (fast charging, interactive charging, balanced charging, maintenance charging)

Provide IO ports for system interlocking protection

Equipped with industrial communication bus (CAN/MODBUS/PROFIBUS DP)

High protection and safety level (IP54), designed specifically for industrial applications

Protective characteristics

● Overheat protection: When the internal temperature of the charger exceeds 75 ℃, the charger will shut down for protection and automatically resume charging when the temperature drops.

Short circuit protection: When an unexpected short circuit occurs at the output of the charger, the charger automatically shuts down the output. After the fault is resolved, the charger restarts charging with a delay of 10 seconds.

● Reverse connection protection: When the battery is reversed, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging, nor will there be any damage.

● Input low voltage and overvoltage protection: When the input AC voltage is below 185V or above 265V, the charger will shut down for protection and automatically resume operation after the voltage is normal.

2、 Technical indicators

Rated input voltage: AC220V ± 15%

Rated frequency: 45~65 Hz

Battery pack voltage: 48V

Full load efficiency: ≥ 93%

Maximum charging current: 100A

Uniform charging and floating charging: automatic completion

● Battery type: Lithium iron phosphate battery

● Shutdown method: automatic, or timed, or automatic shutdown after disconnecting the charging plug

Cooling method: forced air cooling

Display method: LED digital meter head, combined with LED light to indicate charging status

Mechanical impact and seismic rating: in accordance with SAEJ1378 requirements

● Protection level: IP66

Operating temperature: -5 ℃~+45 ℃

Storage temperature: -30 ℃~+70 ℃

Charging control: temperature compensation control, never overcharge or undercharge

Connector configuration: ANEN350A

Product specifications

Voltage level

24V system

48V system

model

LPC120-24

LPC180-24

LPC240-24

LPC100-48

LPC150-48

LPC200-48

power

3600W

5400W

7200W

6000W

9000W

12000W

Charging current

5-120A

5-180A

5-240A

5-100A

5-150A

5-200A

input voltage 

220VAC ± 10%, 50/60Hz (optional 380VAC ± 10%)

power factor 

≥ 0.99@220Vac /50A, ≥ 0.98@220Vac /25A (single module)

Dynamic adjustment rate

± 5.0% for load changes of 10-90% or 90-10%, adjustment time<200us

Load regulation

± 0.5% from 10% to 100% load

Charging voltage

16-30VDC

43-58VDC

Steady current accuracy

≤ ± 0.5%

Noise voltage

<200 mV peak, 30 MHz bandwidth,<2 mV rms phone weight

Adjusting accuracy

≤ ± 0.5%

Time accuracy

≤ ± 10S/24h

Charging parameter settings

voltage

0.01V

Current

0.1A

time

1S

aspect

Based on power

weight

Based on power

working temperature 

0 ℃~45 ℃

Storage temperature

-10 ℃~40 ℃

Working humidity

Relative humidity of 10%~80%, no condensation

protect

Over current, over voltage, over temperature, reverse connection, leakage, short circuit, cut-off

communication

CAN/MODBUS/PROFIBUS DP optional

Interactive DIO

Dry contact DIO, battery contact notification, standby, charging, charging completed, fault

safety standards

IEC 60950-1

Electromagnetic compatibility standards

EN 61000-6

environment

ETSI EN 300 019-2 complies with RoHS standards

Insulation and pressure

3.0 KVAC - input to output 1.5 KVAC - input to ground 0.5 KVDC - output to ground

Mean time between failures

5 million hours

noise

50DB

The Hawker charging station adopts a floor mounted installation method.

HUADA/HAWKER LPC100-48 Charging Station