Contact Platform Support
Help CenterStable Friction Coefficient of Hengyang Heavy Industry SBD160-B Hydraulic Safety Brake
Related Products
-
SBD250-C Hydraulic Safety Brake Hengyang Heavy Industry Open Brake Limit SwitchCNY 1500 - 2900MOQ: 5 Units -
SBD365-C Hydraulic Safety Brake Hengyang Heavy Industry High Performance Friction PadCNY 1500 - 2900MOQ: 5 Units
-
SBD425-C Hydraulic Safety Brake Hengyang Heavy Industry High Wear-resistant Brake PadsNegotiableMOQ: 5 Units
-
Hengyang Heavy Industry SBD50-D Hydraulic Safety Brake Reasonable Sealing StructureCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD80-D Hydraulic Safety Emergency Brake is Easy to Use.CNY 1500 - 2900MOQ: 5 Units
There shall be no flammable, explosive and enough to corrode metal, damage insulation gas and conductive dust around the brake 3.5 Outdoor rain and snow erosion or corrosive gases and media should be anti-corrosion type products.
Pneumatic disc brake adopts brake body for cavity type, pneumatic disc brake around the drum joint gap, usually four weeks above at the same time with by sealant sealing. Such as the use of five-hole brake, can be inserted into the sealing plate after contact with the plate, brake loaded with rosin braking turbine, metal and other materials for sealing. It can be seen that the pneumatic disc brake has other working principles, such as the turbine principle, the metal principle, the brake valve principle and so on.
The pneumatic caliper disc brake effectively controls the cylinder piston to rotate back and forth, improves the combustion resistance of the cylinder, and produces good braking ability.
It consists of DC coil, control coil and transmission parts, and its working principle and function are the same as that of electric vehicles. Normally open pneumatic disc brake is divided into two kinds of batteries and radiators. The driving parts on this kind of electric car is the whole battery, the energy of the battery is used for gravity brake, and the contact is controlled by the wire rope, and the driving parts are connected with the motor control coil through screws. Normally open electric disc brake has the characteristics of fast starting, sensitive acceleration, safe and reliable, easy to operate and so on.
Send Inquiry to This Supplier
You May Also Like
-
SBD100-D Hydraulic Safety Emergency Brake Hengyang Heavy Industry Simple Maintenance and Good ResultsCNY 1500 - 2900MOQ: 5 Units
-
SBD120-D Disc Brake Hengyang Heavy Industry With Hydraulic Actuated Release DeviceCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SVD240-D Hydraulic Safety Brake With Fault IndicationCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD100-A Hydraulic Safety Brake Casting CraneCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD125-A Hydraulic Safety Emergency Brake Short Closing TimeCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD160-A Hydraulic Safety Brake is Suitable for Belt Conveyor Etc.CNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD200-A Hydraulic Safety Brake With Special Disc Spring Applied ForceCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD315-A Disc Brake is Easy to UseCNY 1500 - 2900MOQ: 5 Units
-
SBD80-B Hengyang Heavy Industry Hydraulic Safety Emergency Brake With Sensitive ActionCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD160-B Disc Brake Low Speed Axle High Power Brake UnitCNY 1500 - 2900MOQ: 5 Units
