MED Approved SOLAS 15Persons 60HP Mercury Outboard Engine Driven Fast Rescue Boat FRC

Product Introduction

MED Approved SOLAS 15Persons 60HP Mercury Outboard Engine Driven Fast Rescue Boat FRC is one high speed rescue boat whose speed can be over 30 Knots. It can be installed with 60HP, 90HP, 150HP outboard motors and 110-250KW diesel engines. Also it can load Max. 15 persons with one stretcher. For outboard motor driven fast rescue boat, it is usually launched by single arm slewing davit and diesel engine driven fast rescue boat is usually launched by “A” type davit which is driven by hydraulic winch with a very fast lifting speed. Also the fast rescue boat meets the SOLAS regulations and MED strictly and completely with Wheelmark and approved by the IACS class members.

MED Approved SOLAS 15Persons 60HP Mercury Outboard Engine Driven Fast Rescue Boat FRC is used for rescuing people in distress and assembling life rafts with good maneuverability. Vessels must be equipped with rescue craft as required for the safer and faster rescue of persons in distress.Normally the size of offshore rescue boat is 4.5m to 6.5m . Can be made as per different requirements.Diesel Engine Fast Rescue Boat is installed with a self righting air box, which could make Rescue boat self righting while capsized.Cruise Ship Rescue Boats using an anti-slip surface on the deck,stainless steel handrails are arranged on the both gunwale to keep security.The Fender could absorb the impacted energy, effectively protect the body from damage.

The fast rescue boat can be equiped with outboard motor, inboard diesel engine with water jet propulsion. The capacity range is 3-15 persons.

And the launching davit can be single arm slewing davit and "A" type davit. All the FRC fast rescue boats are approved by CCS, BV, ABS, DNV-GL, EC, MED, RMRS, IRS etc. It meets the latest SOLAS regulations.

Main Model

Product Feature

• Completely meet SOLAS regulations and LSA codes

• FRP(GRP) material, high strength, light weight, seawater corrosion resistant

• International orange color for easy searching

• Unsinkable ability improve the safe function.

• 3.8-6.2m davit slewing radius for different installation requirements.

• Water jet propulsion with diesel engine.

• Various speed(6-35knots) for different requirements.

• SOLAS Regulation Water Jet FRB Fast Rescue Boat,can be installed on any type of vessels.

• Fiberglass Marine Rescue Boat engines can be inboard diesel engine or outboard motor.

• FRC Marine Fast Rescue Boat can be lowered and lifted by Single Arm Slewing Davit or A-type Davit.

• Class approved material for davit ensures the quality.

• World wide after sales service stations.

In order to alleviate the damage caused to the hull by the squeezing and collision of the fast rescue boat during the departure maneuver, rubber fenders made of rubber materials are embedded around the sides of the fast rescue boat hull. There is a bow cable release device at the bow of the fast rescue boat, and a cable pile is set on the left and right sides of the stern of the fast rescue boat, mainly used for towing and assembling rescue boats. In the fast rescue boat structure that uses a single arm davit for lowering and retrieving operations, there is one bow davit and two stern davits, forming three points that converge into one point for controlling lifting and lowering operations. A hand operated drainage pump is installed at the tail of the fast rescue boat to facilitate the timely discharge of accumulated sewage inside the boat. The sewage accumulated inside the boat is discharged outside the boat through the drainage pipe system of the drainage pump. There is a drainage outlet at the lowest point in the stern of the rescue boat, which is convenient for the natural flow and discharge of accumulated water inside the boat to the outside during navigation or other situations. The bottom plug of the rescue boat is set at the lowest point at the rear of the rescue boat. When the rescue boat is out of water, the bottom plug is opened to facilitate the drainage of water inside the boat. At the tail of the rescue boat, there is a foldable fixed boarding ladder made of aluminum alloy, which is convenient for underwater personnel to board the boat. Lifesaving handropes are convenient for underwater personnel to use when waiting for rescue or assisting in climbing rescue boats.