Guangzhou Yingpeng Point Infrared Purple Composite Flame Detector

Name: Point type infrared flame detector

Model: A715UV/IR2

Sensors:

Ruitan AE-S708/3, AE-S708/4, and AE-S708/5 infrared pyroelectric sensors

HAMAMATSU R2868 cold cathode ultraviolet phototube

Optical window housing: White gemstone (AI203)

Material: Aluminum alloy

Forming process: die-casting

Coating process: surface electrostatic powder spraying, internal metal passivation treatment

Weight: ≤ 1kg

Explosion proof grade: Exd II CT6

Protection: IP66

Working current: monitoring ≤ 15mA, alarm status ≤ 35mA

Preheating time: 60s after power on

Fault alarm: When a flame is detected in the monitored area, the detector enters a fire alarm state;

The fire alarm input relay acts and the yellow fault indicator light illuminates;

Alarm threshold: When both fire and fault occur simultaneously, fire alarm takes priority;

1-3 levels adjustable (set by electromagnetic rod)

The number of times the green light flashes during monitoring indicates the alarm threshold.

Alarm delay: 0-30S adjustable (set to 0S at the factory)

Drift compensation: sensor hardware compensation and intelligent software compensation combined mode

Can effectively compensate for drift caused by temperature, environmental changes, and long-term operation of components

Interference source suppression: can effectively suppress the influence of non flame interference sources, such as sunlight (direct and reflected)

Commonly used artificial light sources, background radiation sources, thermal moving objects, welding, etc.

Indicator light:

Monitoring status: green light flashing

Fire alarm status: Red light always on

Fault status: yellow light constantly on

Output:

Fire alarm relay, acting upon alarm, output contact 1A@30VDC 1A@250VAC

Fault relay, acting upon fault, output contact 1A@30VDC 1A@250VAC

4-20mA current loop (select models only)

Serial communication interface

Working temperature: '-10 ℃~+55 ℃

Working humidity: ≤ 95% HR, no condensation

Storage temperature: '-20 ℃~+60 ℃

Settings: Using a PC and specialized software, the alarm parameters of the detector can be set through the serial communication port;

Alarm mode, alarm threshold, alarm delay time, requiring professional operation and password authorization.

Suggested setting: Use the magnet at hand to control the built-in reed tube to adjust alarm sensitivity

Record query: Using a PC and specialized software, the internal records of the detector can be set through the serial communication port.

Factory settings: alarm threshold and delay time. User settings (default factory settings): alarm threshold and alarm delay time.

Factory functions: maintenance, calibration, compensation parameter information, qualification identification, software version, product ID, etc.

Professional operation and password authorization are required.

Power supply: minimum: 18VDC (customizable 12VDC)

Standard: 24VDC

Maximum: 30VDC

Product functional features:

1. Developed with principles of ultraviolet and infrared detection, with low false alarm rate

2. Built in 2 infrared sensors and 1 ultraviolet sensor

3. Three wire current loop and alarm and fault relay output modes are optional

4. Patented signal processing algorithm to minimize the possibility of false positives.

5. The detection angle can reach 120 °, and the axis detection distance can reach 50 meters

6. The detection direction can be adjusted 360 °

7. Multi level sensitivity settings to meet different needs in more occasions

8. Exd IIC T6 explosion-proof grade.

Executive standards:

I GB15631-2008 "Special Fire Detectors"

I GB1291-2006 "Point Type UV Flame Detectors"

IGB3836.1-2000 Electrical Equipment for Explosive Gas Atmospheres Part I: General technology Requirements

IGB3836.1-2000 "Electrical Equipment for Explosive Gas Atmospheres" Part 2: Flameproof Type "D"