Salt Spray Test Chamber

Salt Spray Test Chamber                       

Product model: JF0081

Product Introduction

This kind of salt spray test chamber is one of the "three prevention" (damp heat, salt spray, mold) test equipment in artificial climate environment. It is an important test equipment for studying various environmental adaptability and reliability in machinery, national defense industry, light industry electronics, instrument and other industries. The salt spray corrosion test chamber can be used for neutral salt spray test and acetate spray test according to GB/T2423.17 "Basic Environmental Test Procedures for Electronic and Electrical Products Test Ka: Salt Spray Test Method".

Technical Parameter

1. Neutral salt water spray test: NSS,ACSS; test chamber: 35℃±1℃; saturated air barrel: 47℃±1℃.

2. Acid (corrosion resistance) test: CASS; test room:50℃±1℃; saturated air barrel:63℃±1℃.

3. Drying test: laboratory temperature: 40℃-80℃±0.5; humidity: 30%-98±2%RH

4. Constant temperature and humidity test: laboratory temperature: 10℃-80℃±0.5;

humidity: 30%-98±2%RH

Features

1. Test room: PVC gray impact-resistant board, thickness 6m/m.

2. Constant temperature water tank: made of PVC gray impact-resistant board, thickness 6m/m, with

automatic water level controller, eliminating the inconvenience of adding water manually.

3. Test chamber cover: made of PVC board, thickness 10m/m, with an indoor light, a set of

reinforced safety glass windows and a set of air pressure cylinder left and right (automatic opening and closing).

4. Test drug replenishment bucket: hidden with water level table, PVC gray impact-resistant board,

thickness 5m/m, and the appearance of the machine into one.

5. Test chamber basket: PVC gray impact resistant board, free to adjust the test angle of 15o and 30o

angle.

6. Saturated air barrel: made of SUS#304 stainless steel plate, thickness 2m/m, with automatic water

level controller, eliminating the inconvenience of adding water manually.