Mitsubishi touch screen GT2705-VTBD

Mitsubishi touch screen GT2705-VTBD

GT2705-VTBD parameter description: 5.7 inch, TFT color LCD screen, VGA 640 * 480 points, 65536 colors, 32MB memory

Mitsubishi touch screen GT2705-VTBD performance specification

[Display unit]

◆ Display software element: TFT color LCD screen

◆ Picture size: 5.7 inches

◆ GT2705-VTBD resolution: VGA: 640 * 480 points

◆ Display size: 115.2 (W) * 86.4 (H) [mm]

◆ Number of display characters:

16 dot matrix standard font: 40 characters * 30 lines (full width)

12 dot matrix standard font: 53 characters * 40 lines (full width)

◆ Display color: 65536 colors

◆ Brightness adjustment: level 32

◆ Background light: LED (cannot be replaced)

◆ Backlight life: about 60000 hours (the time when the ambient temperature is 25 ℃ and the brightness is 50%)

[Touch screen]

◆ Mode: analog resistance film mode

◆ Key size: 2 * 2 points smaller (each key)

◆ Press simultaneously: 2 points

◆ Service life: more than 1 million times (operation force is less than 0.98N)

Mitsubishi touch screen GT2705-VTBD input power DC24V

◆ Power supply voltage: DC24V (+25%, - 20%)

◆ Power consumption:

Under load: below 30W

Body monomer: below 7W

When the single body background light is off: below 5W

◆ Impulse current: below 69A (1ms, ambient temperature 250C, load)

◆ Allowable instantaneous stop time: within 10ms

◆ Noise tolerance: noise voltage 1500Vp-p, noise amplitude 1 μ S. Pass the noise simulator with noise frequency of 25~60Hz

◆ Applicable crimping terminals: crimping terminals RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A for M3 bolts

◆ Suitable tightening torque (terminal block terminal bolt): 0.5N. m~0.8N. m

◆ Withstand voltage: AC350V between power terminal and ground wire for 1 minute

◆ Insulation resistance: DC500V between power supply terminal and ground wire is more than 10M Ω through insulation resistance meter

◆ Applicable wire size: 0.75 mm2~2 mm2

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series.