Textile Machinery Spare Parts Ceramic Non-return Valve Water Jet Loom Parts

Textile Machinery Spare Parts Ceramic Non-return Valve Water Jet Loom Parts

The one-way valve is a device where the fluid can only flow along the water inlet, but the medium at the water outlet cannot return. Therefore, the hydraulic check valve can also be a check valve.

Spring type: the liquid lifts the raft controlled by the spring from the bottom to the top by the pressure. When the pressure disappears, the spring force will press down the raft flap to close the liquid backflow. Commonly used for check valves with smaller sizes.

Introduction: New type one-way valve. According to the advantages of other unilateral valves, the newly improved check valve is composed of stainless steel, ceramics and super wear-resistant materials, with long service life and good stability.

One way valve is also called check valve or non-return valve. The ceramic one-way valve of our company is a proprietary product developed for water jet looms. It is made of super wear-resistant ceramics and new materials. During the operation of the machine, a stable water pressure supply is guaranteed, which greatly increases the starting efficiency of the water jet loom and the yield of the cloth surface quality, thus increasing the economic benefits.

Eastsong Enterprises is leading manufacturer of weaving looms and textile machinery spare parts,

Looms include: air jet loom, water jet loom, rapier loom, terry towel loom and jacquard loom.

Spare parts include: ceramic nozzle, ceramic plunger kit, ceramic check valve, leno heald, heddles, drop pin, heald wire, heald frame, reed, cross beam, cloth roller, take up roller, loom panel, reed guard, shaft, warp stop motion device, motor bracket, let off gearbox, take-up gear box, auxiliary spray electromagnetic valve seat and clip, waste selvage frame, weft frame stand, reed base and brace, selvedge assembly, roller covering tape, warp beam, the electronic components, etc.

The one-way valve is called ball valve for short. There are many kinds of valves used in textile machinery. According to the material classification, it can be divided into metal, plastic, ceramic, and ball, cylinder and spring according to the shape and structure. Each company has different design ideas, so the shape and material are different. But the end result is the same. One side is water inflow, the other side is water outflow. The automatic water jet looms are mainly used for ball stainless steel check valve, ceramic ball stop valve, flat bottom ball non-return valve, spring cone nonreturn valve, etc.