Contact Platform Support
Help CenterTecMig Hardfacing Cladding Flux Cored Wires H600
Related Products
-
TecMig Gas Shield Stainless Steel Flux Cored Wires E308LT1-1US$ 5 - 8MOQ: 1000 Kilograms -
TecMig Gas Shield Stainless Steel Flux Cored Wires E309LT1-1US$ 5 - 8MOQ: 1000 Kilograms
-
TecMig Gas Shield Stainless Steel Flux Cored Wires E316LT1-1US$ 5 - 8MOQ: 1000 Kilograms
-
TecMig Gasless Self Shield Stainless Steel Flux Cored Wires E308LT0-3US$ 7 - 9MOQ: 1000 Kilograms
-
TecMig Gasless Self Shield Stainless Steel Flux Cored Wires E316LT0-3US$ 7 - 9MOQ: 1000 Kilograms
H600
(E6-UM-60 )
DIN 8555 E 6-UM60 (35W)T
Description：
It deposits a self-hardening martensite structure. High hardness and good slag removal can be obtained. Suitable for pump impeller, cutter blade, agitator propeller, sugar crane hammers.
Diameters:
3.2mm, 4.0mm, 5.0mm
Typical Mechanical Properties：
As Welded |
Interpass temp.150℃ |
Cont. Build Up |
Vicker’s Hardness (HV) |
620 |
590 |
Rockwell’s Hardness (HRC) |
57 |
55 |
Shore’s Hardness (HS) |
75 |
72 |
Typical Chemical Compositon:
C |
Mn |
Si |
Cr |
Mo |
0.53 |
2.6 |
0.9 |
2.8 |
0.05 |
Welding Current (AC or DC+):
Dia:(mm) |
3.2 |
4.0 |
5.0 |
Current/A |
80-120 |
120-170 |
160-210 |
Note:
1. Rusty, water, oil and other impurity should be cleaned before welding.
2. Choose right welding parameter according to the requirements
3, Dry the electrodes at 80-120℃ for 1 hour or more
4, Preheat the weld piece and keep the inter-pass temp. above 200℃ to prevent cracking
5, Use low hydrogen electrode for buffer layer on difficult-to-weld steels
Send Inquiry to This Supplier
You May Also Like
-
TecMig Gas Shield Mild Steel Mig Welding Wires Tig Rods ER70S-6US$ 7 - 9MOQ: 1000 Kilograms
-
TecMig Gas Shield Mild Steel Mig Welding Wires Tig Rods ER80S-D2US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Gas Shield Mild Steel Mig Welding Wires Tig Rods ER70S-2US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Gas Shield Mild Steel Mig Welding Wires Tig Rods ER70S-3US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Gas Shield Mild Steel Mig Welding Wires Tig Rods ER70S-4US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Cooper Free Non-Cooper Coated Mild Steel Mig Welding Wires ER70S-6US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Cooper Coated High Tensile Strength Welding Wire ER100S-1US$ 2 - 4MOQ: 1000 Kilograms
-
TecMig Cooper Coated High Tensile Strength Welding Wire ER120S-1US$ 3 - 5MOQ: 1000 Kilograms
-
TecMig Stainless Steel Mig Welding Wires Tig Rods ER308LUS$ 5 - 8MOQ: 1000 Kilograms
-
TecMig Stainless Steel Mig Welding Wires Tig Rods ER309LUS$ 5 - 8MOQ: 1000 Kilograms
