Contact Platform Support
Help CenterTecMig Aluminum Alloy Mig Wires Tig Rods ER5356 AlMg5
Related Products
-
TecMig Aluminum Alloy Mig Wires Tig Rods ER5183US$ 5 - 8MOQ: 1000 Kilograms -
TecMig Tobin Bronze Brass Rods S221US$ 8 - 10MOQ: 1000 Kilograms
-
TecMig Manganese Bronze Brass Rods S222US$ 8 - 10MOQ: 1000 Kilograms
-
TecMig Nickle Bronze Brass Rods S225US$ 8 - 10MOQ: 1000 Kilograms
-
TecMig Silicon Bronze Brass Rods S211US$ 8 - 10MOQ: 1000 Kilograms
ER5356
AWS A5.10 ER5356
EN ISO 18273 S Al 5356 (AlMg5Cr(A))
Description：
An Al-Mg alloy welding wire is mainly used where higher weld strength and greater ductility is required. 5356 has greater resistance to corrosion (salt water) and better color match after annodizing. DC Reversed Polarity connection. Argon shielding gas is required. Welding for 5xxx series alloys.
Welding Position:
Diameters:
0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm.
Typical Mechanical Properties:
Tensile strength(MPa): |
265 |
Yield strength(MPa): |
120 |
Elongation(%): |
27 |
Impact values(≥47J/+20℃): |
-- |
Typical Chemical Compositon:
Si |
Fe |
Cu |
Mn |
Mg |
0.1 |
0.3 |
0.05 |
0.05-0.2 |
4.5-5.5 |
Cr |
Zn |
Be |
Ti |
Al |
0.1-0.15 |
0.09 |
0.0008 |
0.06-0.2 |
Allowance |
Welding Current:(AC)
Dia:(mm) |
0.8 |
0.9 |
1.0 |
1.2 |
1.6 |
Current/A |
60-170 |
90-210 |
140-260 |
190-350 |
|
Voltage/V |
13-24 |
13-24 |
15-26 |
20-29 |
25-30 |
Note:
1.Rusty, oil stains, water and other impurity on the weld parts must be cleaned before welding.
2. Shield Gas:100%Ar or 75%Ar+25%He or 50%Ar+50%He
3. In order to get good welding bead, weld on thick plate should be preheat 100-200℃ before welding.
4. Tig rods ER5356 1.6mm, 2.0mm, 2.4mm, 3.2mm available
Send Inquiry to This Supplier
You May Also Like
-
TecMig Phospher Bronze Round Flat Rods BCuP-2 0%US$ 8 - 10MOQ: 1000 Kilograms
-
TecMig 5% Silver Bronze Brazing Rods BCuP-3US$ 50 - 60MOQ: 1000 Kilograms
-
TecMig 15% Silver Bronze Brazing Rods BCuP-5US$ 100 - 120MOQ: 1000 Kilograms
-
TecMig Submerged Arc SAW Welding Wires EL12US$ 0.8 - 1.1MOQ: 1000 Kilograms
-
TecMig Submerged Arc SAW Welding Wires EL8US$ 0.8 - 1.1MOQ: 1000 Kilograms
-
TecMig Submerged Arc SAW Welding Wires EM12KUS$ 0.8 - 1.1MOQ: 1000 Kilograms
-
TecMig Submerged Arc SAW Welding Wires EH14US$ 0.8 - 1.5MOQ: 1000 Kilograms
-
TecMig Submerged Arc SAW Welding Wires ENi1-KUS$ 0.8 - 1.5MOQ: 1000 Kilograms
-
TecMig Hardfacing Cladding Flux Cored Wires H600US$ 6 - 8MOQ: 1000 Kilograms
-
TecMig Gas Shield Stainless Steel Flux Cored Wires E308LT1-1US$ 5 - 8MOQ: 1000 Kilograms
