Contact Platform Support
Help CenterSolidification Point of Benzene Tester ASTM D852
Related Products
-
Copper Strip Corrosion by Industrial Aromatic Hydrocarbons TesterNegotiableMOQ: 1 Set -
Automatic Toluene Insoluble Matter TesterNegotiableMOQ: 1 Set
-
Automatic Benzene Products Distillation Range Tester ASTM D1078NegotiableMOQ: 1 Set
-
JET FUEL SILVER STRIP CORROSION TESTER IP227NegotiableMOQ: 1 Set
-
Jet Fuel Particulate Contaminant in Aviation Fuel Tester ASTM D2276NegotiableMOQ: 1 Set
Product Introduction
This instrument is suitable for detecting the crystallization point of benzene
Technical Parameter
1. Applicable standard: ASTM D852 GB/T3145
2. Temperature control method: digital display PID temperature controller
3. Temperature range: normal temperature~-20℃
4. Refrigeration method: compressor refrigeration
5. Stirring method: magnetic stirring
6. Power supply: AC220V±10%/50HZ
7. Working unit: double hole
Main Feature
1. Separate mechanical stirring device;
2. Imported fully enclosed compressor for refrigeration;
3. Stainless steel stirring wire;
4. Separate temperature control system;
5. There is an automatic compressor cooling system inside;
6. One-piece structure, small and beautiful appearance;
7. The instrument shell is made of cold-rolled steel plate, and the surface is electrostatically sprayed and baked at high temperature, which is easy to clean and corrosion resistant;
8. The compressor has a self-protection function;
9. Fengming of the system when the temperature is too high;
10. Microcomputer controller, PID function, digital display temperature (continuous display during testing), degree 0.1°C, Pt100 RTD temperature probe;
11. It is very convenient to access the control box;
12. The micro self-priming pump imported from Taiwan carries out internal circulation to ensure the uniformity of the cold bath temperature;
13. The built-in electric heating rod can quickly increase the temperature of the cold bath.
Send Inquiry to This Supplier
You May Also Like
-
Lubricating Oil Liquidity Tester DIN51568NegotiableMOQ: 1 Set
-
Foaming Characteristics of Lubricating Oils Tester (Air Bath) ASTM D892NegotiableMOQ: 1 Set
-
Automatic Lubricating Oil Evaporation Loss Tester ASTM D5800NegotiableMOQ: 1 Set
-
Evaporation of Rust Preventive Oils Tester JIS K2246NegotiableMOQ: 1 Set
-
Inhibited Mineral Oils Sludging and Corrosion Tendencies Tester ASTM D4310NegotiableMOQ: 1 Set
-
Petroleum Products ColorimeterNegotiableMOQ: 1 Set
-
Automatic Cetane and Octane Number of Diesel Fuel Oil TesterNegotiableMOQ: 1 Set
-
Oil Separation From Lubricating Grease During Storage TesterNegotiableMOQ: 1 Set
-
Rusting Grease Oxygen Inhalation TesterNegotiableMOQ: 1 Set
-
Lubricating Grease Water Washout TesterNegotiableMOQ: 1 Set
