CPCI backplane in slot 3U14

3U CPCI backplane in slot 14

Supports the 33MHz 32bit CPCI bus

One system slot and 13 function slots. The system slots are located on the right of the backplane

Three power supply modes are available: CPCI power supply, ATX power supply, and terminal power supply. Choose one of three. Do not use both.

4 fan power ports, reset ports, CPCI and ATX switch ports

Support +5V/+3.3V V (I/O). The default value is +5V

Terminals: +5V, +3.3V, +12V, -12V, GND. 2 cpci power interfaces, 1 ATX power interface;

The PCI bridge board does not occupy a slot and does not affect the rear cable outlet

Stud fixing holes for shock and vibration environments

The maximum voltage drop of the backplane power supply is less than 20mV

Characteristic impedance: 65±10%ohm

Dimensions of board: 128.7mm×369.1mm×3.2mm (width × length × thickness)

Operating temperature: 0℃ ~ +70℃

Support for hot swap