telit 4G module LE910-EU1

Telit LE910-EU1 LGA Module belongs to LE910 Series of Cat. 1 modules, which are optimized for LTE low category networks and are available in single 4G mode and 2G fallback option. In addition to VoLTE support, the LE910Cat.1 series are swappable with other modules in the xE910 family.

Telit LE910-EU1 delivers 4G radio access technology in the 28.2 x 28.2 x 2.2 mm family form factor and supports downlink up to 10Mbps and uplink up to 5Mbps. It has a brother model Telit LE910B1-NA which supports LTE band B2, B4, B5, B12, B13 for AT&T carrier in USA and VoLTE is available.

Telit LE910-EU1 module Specs:

* Telit LTE Cat.1 module

* Target market: Europe

* Support 4G Frequency bands(MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800)

* Support 3G Bands: No

* Support 2G Bands: B3(1800), B8(900)

* VoLTE: No

* LTE FDD Cat.1, 3GPP release 9 compliant

* Rx Diversity and MIMO DL 2x2

* SIM application Tool Kit 3GPP TS 51.014

* Serial port multiplexer 3GPP TS27.010

* SMS over IMS

* Built in UDP/TCP/FTP/SMTP stack

* Control via AT commands according to 3GPP TS 27.005, 27.007 and Telit Custom AT commands

* Data rates: Uplink up to 5 Mbps, Downlink up to 10 Mbps

* Interfaces
- 144-pin LGA Interface
- 10 I/O ports (@1.8V) including multifunctional I/Os
- USB 2.0 HS
- UART
- 1.8 V / 3 V SIM interface
- RF pad, RX Div. & MIMO pad

* Output power
- Class 3 (0.2 W, 23 dBm) @ LTE
- Class 3 (0.25 W, 23 dBm) @ 3G
- Class 4 (2W) @ GSM 900
- Class 1 (1W) @ DCS 1800

* Supply voltage
- Nominal: 3.8 VDC
- Range: 3.3 - 4.2 VDC

* Software and Application Development/AppZone application resources
- Programming language: C
- IDE: Eclipse
- Dedicated File System: 5 MB
- Separate App. RAM Space: 2 MB

* Operating and Storage Temperature Range: -40°C to +85°C

* REACH and RoHS compliant

* Dimensions 28.2 x 28.2 x 2.2 mm

* Approvals
- FCC/IC, PTCRB, GCF (North America)
- R&TTE/GCF (Europe)
- Radio/Telecom Biz Act (Japan)