Contact Platform Support
Help CenterJBDS-CD Series Touchscreen Digital Display Ultralow-temperature Charpy Impact Testing Machine
Related Products
-
300J 450J 500J 750J Semi-automatic Metal Material Charpy Impact Testing MachineNegotiableMOQ: 1 -
JBS-500C 500J PLC Control Pendulum Impact Testing Machine With Aluminum Alloy Fully Enclosed Protective CoverNegotiableMOQ: 1
-
JBS-300C 300J Digital Display Charpy Pendulum Impact Testing MachineNegotiableMOQ: 1
-
JBS-C Series Touchscreen Digital Display Semi-automatic Charpy Impact Testing MachineNegotiableMOQ: 1
-
JBW-Z Series PLC Control Automatic Feeding And Position Device Impact Testing MachineNegotiableMOQ: 1
JBDS-CD Series Touchscreen Digital Display Ultralow-temperature Charpy Impact Testing Machine
1.Application:
JBDS-CD Touchscreen Digital Display Ultralow-temperature Charpy Impact Testing Machine is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load.
It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research.
The equipment is simple operate with High Efficiency, Raise Pendulum, Hanging Swing, Feeding, Positioning, Shock and Temperature Adjustment Settings are controlled by a microcontroller, equipped with special feeding device automatic feeding, automatic sample face orientation. Sample baked to impact time is less than two seconds, meet the requirements of low-temperature metal Charpy impact test method.
It can use the remaining energy to automatic Raise Pendulum after impact the sample, prepare for the next test preparation, high efficiency.
3.Technical Specifications:
|
Model |
JBDS-300CD |
JBDS-450CD |
JBDS-600CD |
JBDS-750CD |
|
Control Method |
Single Chip Control |
|||
|
Max. Impact Energy |
300 J |
450 J |
600 J |
750 J |
|
Impact Speed |
5.24 m/s |
|||
|
Pre-rising Angle Of The Pendulum |
150° |
|||
|
Angle Accuracy |
±0.1° |
|||
|
Specimen Bearer Span |
40+0.2 mm |
|||
|
Round Angle Of The Jaw |
R 1.0~1.5 mm |
|||
|
Round Angle Of Impact Edge |
R 2.0~2.5 mm (Special Order: R8±0.05 mm) |
|||
|
Angle Of Impact Edge |
30° |
|||
|
Thickness Of Impact Knife |
16 mm |
|||
|
Capacity Of Sample Box |
6 PCS |
|||
Send Inquiry to This Supplier
You May Also Like
-
JBW-300B 300J 150J PLC Control Semi-automatic Charpy Impact Testing MachineNegotiableMOQ: 1
-
JBS-500B 500J 250J Series Touchscreen Digital Display Charpy Impact Testing MachineNegotiableMOQ: 1
-
JBW-B Series Computer Control Semi-automatic Charpy Impact Testing MachineNegotiableMOQ: 1
-
Full Automatic Astm Izod Impact Testing Machine Charpy Impact Testing Machine PriceNegotiableMOQ: 1
-
Metal Liquid Nitrogen Low Temperature RefrigeratorNegotiableMOQ: 1
-
2mm V Notch Cutting Tools for Impact Broaching MachineUS$ 4758.58MOQ: 1 Piece
-
JB-300B Charpy Pendulum Impact Strength TesterNegotiableMOQ: 1
-
JBW-HD Computer Control Low Temperature Instrumented Oscilloscope Impact Testing MachineUS$ 10496.85 - 13995.80MOQ: 1 Set
-
Liquid Nitrogen 196 Low Temperature Charpy Impact Test Cooling Chamber PriceNegotiableMOQ: 1
-
The Impact Test Specimen Gap Hydraulic Broaching Machine VU-2YNegotiableMOQ: 1
