RESUN LP-20/40/60/100 Low Noise Pond Air Compressor for Koi Fish Septic Tank Hydroponic Oxygen Air Aerator Aquarium Air Pump

Features:

a, Special synthetic rubber components, strong and durable;

b, Energy-saving motor, environmental protection design;

c. Unique structure, good heat dissipation performance, and extremely low noise;

d. It is suitable for the basic configuration of powerful aeration such as flower ponds, koi ponds, multi-group tanks, breeding farms, etc.

HAILEA  ACO Air Pump Model List

LP20: 8pcs / carton, carton size 49*38*42CM, suitable for 250~1500L water tank. plastic

LP40: 4pcs / carton, carton size 43*30*48CM, suitable for 500~3000L water tank, plastic

LP60: 4pcs / carton, carton size 52*32*51CM, suitable for 700~4200L water tank, aluminum alloy

LP100: 2pcs / carton, carton size 47*40*50CM, suitable for 1600~7400L water tank, aluminum alloy

Terms and Conditions

1. The power supply voltage used by the air pump must be consistent with the voltage specification indicated on the product nameplate.

2. The location of the air pump must be higher than the high water level of the aquarium to reduce water flowing into the machine along the exhaust pipe.

3. Connect the gas transmission management to the outlet nozzle of the air pump, and then evenly distribute the air bubbles in the aquarium, turn on the power supply, and the air pump can add air and oxygen.

4. According to the oxygen demand of the aquaculture, products with single air outlet, double air outlet or with gear adjustment switch can be used

5. The inlet filter cotton and air bubble stone of the air pump should be replaced every 3 months or so.

6. When the air pump is not in use, unplug the power supply, put away the air pipe and bubble stones, and store them in a dry place for future use.

Precautions

1. The air pump cannot be immersed in water.

2. If you accidentally drop the air pump into the water, remember to unplug the power supply first. After finding out the cause, repair it before using it. The correct way to unplug the power supply is to hold the plug and pull it out. Do not pull the power supply part.

3. If you find abnormal leakage of the air pump, you should unplug the power supply. After finding the cause, repair it before using it. The correct way to unplug the power supply is to hold the plug and pull it out. Do not pull the power supply part.

4. If the air pump is accessible to children, or the air pump is used by children, parents need to monitor and guide them.

5. If the air pump fails, please do not dismantle and repair it without authorization, but send it to the repair station.