Contact Platform Support
Help CenterNon-corrosive Radar Level Meter 120G/80GHz RL807 for Food and Medical Applications
Related Products
-
High Dust,High Temperature Radar Level Meter 120G/80GHz RL808US$ 1 - 1MOQ: 1 Piece -
High Dust Powder Radar Level Meter 120G/80GHz RL810US$ 1 - 1MOQ: 1 Piece
-
Radar Level Meter 120/80GHz RL806 for Industry ApplicationUS$ 1 - 1MOQ: 1 Piece
-
Non-corrosive Radar Level Meter 120/80GHz RL805 for Corrosive ApplicationsUS$ 1 - 1MOQ: 1 Piece
-
V374A Seismic Accelerometer ,10-20V/g High Sensitivity Vibration SensorUS$ 200 - 400MOQ: 1 Piece
The radar level meter antenna emits a very narrow microwave pulse, which propagates in space at the speed of light. When it encounters the surface of the measured medium, part of its energy is reflected back and received by the same antenna. The time interval between the transmitted pulse and the received pulse is proportional to the distance from the antenna to the surface of the medium to be measured. Because of the extremely high propagation velocity of electromagnetic wave, the time interval between transmitting pulse and receiving pulse is very small (nanosecond). The 120G/80GHz RL series radar level meter adopts a special correlation solution technology, which can accurately identify the time interval between the transmitted pulse and the received pulse, so as to further calculate the distance between the antenna and the measured dielectric surface.
-the beam angle is small, the energy is concentrated, and has stronger anti-interference ability, which greatly improves the measurement accuracy and reliability.
-small antenna size, easy to install and install dust cover and other antenna protection devices;
-the blind area of measurement is smaller, and good results will be achieved for the measurement of small tanks;
-the wavelength is shorter, so it is more suitable for measuring the material level of small particles.
-using advanced microprocessors and unique EchoDiscovery echo processing technology, radar level meters can be used in a variety of complex operating conditions.
-using pulse working mode, the radar level meter has extremely low transmitting power and can be installed in various metal and non-metallic containers without harm to the human body and the environment.
Maximum range: 20m.
Measurement accuracy: ±3mm.
Process connection: stainless steel 316L horn / PTFE oscillator.
Antenna structure: conical oscillator, anticoagulant.
Process temperature: -40°C to 150°C.
Process pressure: -0.1 to 1.6MPa.
Frequency range: 120GHz. 80GHz, 26GHz
Signal output: 4 to 20 mA/HART.
Power source: two-wire / four-wire
Send Inquiry to This Supplier
You May Also Like
-
Tri-axial CAN-Modbus Digital Output Accelerometer V835 3-axes SensorUS$ 200 - 400MOQ: 1 Piece
-
V341/V340VT Water Proof Industrial Vibration Sensor,Integrated Side Exit Cable Vibration & Temperatur SensorUS$ 200 - 400MOQ: 1 Piece
-
V370 38KHz Resonance Vibration Sensor for Stress WaveUS$ 200 - 400MOQ: 1 Piece
-
V314 Low Cost General Industry IEPE Vibration Transducer, Accelerometer SensorUS$ 200 - 400MOQ: 1 Piece
-
V317A Compact Size Industrial Vibration Sensor,low Cost SensorUS$ 200 - 400MOQ: 1 Piece
-
IS-V311AT Intrinsic Safety Vibration and Temperature Combined SensorUS$ 200 - 400MOQ: 1 Piece
-
V310AT Temperature/Vibration Combined Vibration Transducer SensorUS$ 200 - 400MOQ: 1 Piece
-
V310 Series Industry Vibration Transducer, IEPE Sensor,Vibration Real Wave Velocity, RMS, RMS PeakUS$ 200 - 400MOQ: 1 Piece
-
V372P 480℃ Ultra High Temperature PE Accelerometer,vibration Sensor/transducerUS$ 200 - 400MOQ: 1 Piece
-
V432 3-Axis ATD Piezo-resistive AccelerometerUS$ 200 - 400MOQ: 1 Piece
