IS420ESWBH3A

Brand: GE

Type:IS420ESWBH3A

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

In the Connection Setup dialog box, click BROWSE DEVICE(S) to start ProSoft Discovery Service. Right-click the module and choose ASSIGN TEMPORARY IP.

The module’s default IP address is usually 192.168.0.250. Choose an unused IP within your subnet, and then click OK. Important: The temporary IP address is only valid until the next time the module is initialized. For information on how to set the module’s permanent IP address, see Ethernet 1 (page 47). 6 Close the ProSoft Discovery Service window. Enter the temporary IP address in the ETHERNET ADDRESS field of the Connection Setup dialog box, then click TEST CONNECTION to verify that the module is accessible with the current settings. 7 If the Test Connection is successful, click CONNECT. The Diagnostics window is now accessible.

Using the Diagnostics Menu in PCB ProSoft Configuration Builder (PCB) provides diagnostic menus for debugging and troubleshooting. To connect to the module’s Configuration/Debug Ethernet port 1 In the tree view in ProSoft Configuration Builder, right-click the MVI69E-MBS module and then choose DIAGNOSTICS. For instructions on opening and using a project in PCB, please refer to Configuring the MVI69E-MBS Using PCB (page 36). 2 After the Diagnostics window opens, click the SET UP CONNECTION button to browse for the module’s IP address.

In the Ethernet field of the Connection Setup dialog box, enter the current IP address, whether it is temporary or permanent. Click TEST CONNECTION to verify that the module is accessible with the current settings. 4 If the TEST CONNECTION is successful, click CONNECT. The Diagnostics window is now visible.