Contact Platform Support
Help CenterCI867K01 3BSE043660R1 ABB Communication Interface Kit (available in Stock)
Related Products
-
ABB New DCS Module Ci868k01-ea Control System Module 3bse048845r2 BargainingUS$ 100 - 200MOQ: 100 Pounds -
CM572 CM572-DP CM572-DP-XC ABB AC500 PLC Communication ModuleUS$ 10 - 90MOQ: 100 Pounds
-
CM772F 3BDH000368R0001 ABB DCS Ac700f Communication ModuleUS$ 100 - 200MOQ: 100 Pounds
-
CMA120 3DDE300400 ABB As Panel Controller Panel Complete MachineUS$ 100 - 200MOQ: 100 Pounds
-
CMA131 3DDE300411 CMA132 3DDE300412 ABB CMA136 3DDE300416 in StockUS$ 100 - 200MOQ: 100 Pounds
CI867K01 3BSE043660R1 ABB Communication interface kit (available in stock)
CI867K01 3BSE043660R1 ABB Communication interface kit (available in stock)
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
If other devices are to be powered from the same isolated power supply that is
powering the NGC, be careful to avoid any ground loops. The various devices
should be connected in a star configuration. It is also important that any additional
powered devices be able to handle a fairly wide range of input voltages, as the
NGC’s heater will draw about 4 amps (if the auxiliary heater is installed, it might be
as much as 8 amps). This load (4-8 amps) being drawn across any considerable
length of cable can result in a substantial voltage drop (Please refer to Cable
Length Power Specifications table). The resulting lower input voltage to the
additional device could effect its operation. Input voltage excursions fluctuate with
the toggling of the NGC’s heater(s). The heater(s) are turning on and off in an
effort to maintain a very constant internal temperature for the NGC’s GC module.
In an office environment, insure that a good earth ground is established to the
NGC8206. In an office situation, it is easy to not have the NGC well grounded.
Often the third pin (ground) on the power cable is missing or has been removed.
Improper grounding can lead to erratic behavior. Be sure that the unit is properly
grounded. If the unit is not properly grounded, the user could have as much as
60VAC (half line voltage) on the case of the equipment due to capacitive coupling
within the power supply.
Send Inquiry to This Supplier
You May Also Like
-
COM0002 COM0003 ABB New Control PanelUS$ 100 - 166MOQ: 100 Pounds
-
CP405 ABB Cp400 Series HMI Human Machine Interface Touch ScreenUS$ 10 - 260MOQ: 100 Pounds
-
CP430T-ETH 1SBP260196R1001 ABB Man Machine Touch ScreenUS$ 165 - 260MOQ: 100 Pounds
-
CP435T 1SBP260193R1001 ABB Industrial Touch Screen in StockUS$ 113 - 166MOQ: 100 Pounds
-
CP450-T-ETH ABB Touch Screen Human Machine Interface 1SBP26188R1001US$ 113 - 200MOQ: 100 Pounds
-
CS513 3BSE000435R1 ABB Card Ci535v30 / 3bse022162r1 (spot)US$ 190 - 200MOQ: 100 Pounds
-
CSA463AE CSA464AE ABB Module Motherboard Card Controller (in Stock)US$ 165 - 200MOQ: 100 Pounds
-
D685A1156U01 ABB Card Module Controller in StockUS$ 165 - 260MOQ: 100 Pounds
-
DCP02 DCP10 Robot System Card ABB Imported ModuleUS$ 100 - 200MOQ: 100 Pounds
-
DDI01 DDI03 DDO01 DDO02 ABB DCS Power ModuleUS$ 100 - 200MOQ: 100 Pounds
