AO810V2 ABB New Analog Input Module

AO810V2 ABB new analog input module

AO810V2 ABB new analog input module

The AO810/AO810V2 Analog OutputModule has 8 unipolar analog output channels. To supervise the communication to the D/Aconverters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision,which is reportedwhen supplyvoltage to output circuitryis to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output currentis less than the output setvalue and the output setvalue is greater than 1 mA.

General info Article number 3BSE038415R1 Type Analog Output Signal specification 0..20mA, 4..20mA Number of channels 8 HART No SOE No Redundancy No High integrity No Intrinsic safety No Mechanics S800

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

Resolution 14bit Isolation Groupwise isolated from ground Under/over range -/ +15% Output load ≤ 500Ω(supply connected to L1+ only) 250 -850Ω(with supply connected L2+ only) Error Max. 0.1% at 0 -500 ohms (current) Temperature drift Typ. 30 ppm/°C, Max 60 ppm/°C Rise Time 0.35 ms (PL = 500Ω) Update cycle time ≤ 2ms Current limiting Short circuit proof current limited output Maximum field cable length 600meters (656 yards) Rated insulation voltage 50 V Dielectric testvoltage 500 V a.c. Power dissipation 2.3 W Current consumption +5 VModulebus Max 70mA Current consumption +24VModulebus 0 Current consumption +24V external 245 mA Diagnostics Front LED’s F(ault), R(un), W(arning), O(SP) Supervision Module Error: Output power low. Channel Error: Open circuit (for current >1 mA) Status indication of supervision Module Error, Module Warning, Channel Error Environment and certification CE mark Yes Electrical safety IEC 61131-2, UL 61010-1, UL 61010-2-201 Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 Marine certification ABS, BV, DNV-GL, LR Protection rating IP20 according to IEC 60529 Corrosive atmosphere ISA-S71.04 G3 Climatic operating conditions 0 to +55 °C (Storage -25 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 Pollution degree Degree 2, IEC 60664-1 Mechanical operating conditions IEC/EN 61131-2 EMC EN 61000-6-4and EN 61000-6-2 Overvoltage categories IEC/EN 60664-1, EN 50178 Equipment class Class I according to IEC 61140; (earth protected) Max ambient temperature 55 °C (131 °F), forvertical mounting in compact MTU 40 °C (104°F) RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) WEEE compliance DIRECTIVE/2012/19/EU Compability Use withMTU TU810, TU812, TU814, TU830, TU833 Keying code AE Dimensions Width 45 mm (1.77”) Depth 102 mm (4.01”),111 mm (4.37”) including connector Height 119 mm (4.7”) Weight 0.18 kg (0.4lbs.)