RZBX Series Sweep Frequency Response Analyzer, Transformer Winding Deformation Tester

FEATURES:

1. Using the advanced technical of DDS;

2. Using the high speed and advanced microprocessor to design;

3. Using double channels of AD chip of 16 bits;

4. With seven inch LCD touch screen of which the brightness can be adjusted;

5. With thermal printer of which the print thick can be adjusted;

6. It could store 40 groups of data, which could be read to current screen or upload to the PC;

7. With PC software using which we could upload data ,test, analyze data, print data, or create word document;

8. Using USB2.0 to connect to the device；

9. Tester dimension：31cm X 15cm X 15cm；

10. Weight：4.0KG;

11. The tester is conformed to the standard of DL/T911 2016 and can be used for IEC60076-18:2012.

TECHNICAL INDEX:

1. Different sweep modes：

    Linear sweep：

    10HZ-1MHZ      interval  0.5KHZ    2001 dots (conform to DL/T911 2016)

    10HZ-1MHZ      interval  0.25KHZ   4001 dots（PC available）(conform to DL/T911 2016)

    100HZ-2MHZ      interval  0.25KHZ   4001 dots（PC available）

    Initial frequency, interval and scan dots can be set（PC available）

    Section sweep: (conform to DL/T911 2016)

    10HZ-20HZ          interval  1HZ       11 dots 

    20HZ-100HZ          interval  2HZ       40 dots

    100HZ -1KHZ          interval  3HZ     300 dots

    1KHZ-10KHZ        interval  20KHZ    450 dots

    10KHZ –100KHZ      interval  0.3KHZ    300 dots

    100KHZ – 1000KHZ     interval  1KHZ     900 dots

    Section sweep: (conform to IEC60076-18:2012)

    20HZ-100HZ          interval  2HZ       40 dots

    100HZ -1KHZ          interval  2HZ     450 dots

    1KHZ-10KHZ          interval  20HZ    450 dots

    10KHZ –100KHZ       interval  0.2KHZ    450 dots

    100KHZ – 1000KHZ     interval  2.5KHZ     360 dots

    1000KHZ – 2000KHZ     interval  4KHZ     250 dots

2. Test range：(-100dB） - （+20dB）

3. Test accuracy：(-40dB） - （+20dB）0.2dB

                              (-60dB） - （-40dB）0.5dB 

                              (-80dB） - （-60dB）1.0dB

4. Frequency accuracy：<0.01%；

5. Signal input impedance：>1M Ω（Connected according to DL/T911 2016）；

6. Signal output impedance：50 Ω；

7. In-phase test repetition rate：99.5%；