Contact Platform Support
Help CenterConnecting Rod Hardness Eddy Current Sorting Machine LGYDFX-01
Related Products
-
Eddy Current Testing for Auto PartsUS$ 8 - 200MOQ: 1 Bag -
MFL-7389 Tube Magnetic Flux Leakage DetectorUS$ 8 - 2000000MOQ: 1 Pair
-
Portable Magnetic Flux Leakage Testing EquipmentUS$ 8 - 2000000MOQ: 1 Pair
-
Steel Bar TestingUS$ 8 - 2000000MOQ: 1 Pair
-
Steel Pipe TestingUS$ 8 - 2000000MOQ: 1 Pair
The connecting rod hardness eddy current sorting machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital potentiometer is used to adjust the gain of the amplifier through program control. The gain parameters can be set for different battery chips, and the software working mode can be changed to adapt to various battery test applications without changing the hardware.
Features of the connecting rod hardness sorter:
1. The sorting instrument is divided into hardness test (can display Brinell, Rockwell hardness), flaw detection and so on.
2. Hardness test: After starting the machine, use the hardness test probe to perform hardness test sorting on the workpiece. The Brinell or Rockwell value can be selected. The liquid crystal display will show the hardness value of the workpiece.
3. Detection of flaw detection: The workpiece to be tested shall be of the same specification. The instrument shall be calibrated with standard parts (work without damage), and the flaw detection curve on the display shall be adjusted to the upper limit and the intermediate standard point of the lower line. After calibration, Sort the workpiece for sorting.
Connecting rod hardness vortex sorting machine LGYDFX-01 Image Presentation
Connecting rod hardness vortex sorting machine LGYDFX-01 Performance
Connecting rod condition |
same size, same heat treatment process state, the same material |
Sorting accuracy |
Brinell 20HB |
The form of probe |
1HB Brinell, Rockwell 0.1HRC |
Detection speed |
1200 pieces per hour (specific speed depends on the size of the workpiece under test) |
Work power supply |
AC 220V±10%, 50Hz
|
Compressed air pressure |
5 — 8kgf/cm² |
Use environment |
temperature - 10 +40, relative humidity |
Automation of equipment |
Manual charging, automatic detection, automatic sorting and automatic alarm |
As a non-destructive testing instrument and equipment, sensor development company, BKN Technology has been an innovative manufacturer of high-quality, high-performance non-destructive testing instruments and equipment. As one of non destructive testing equipment manufacturers, we provide customer-centric design services to meet the different application needs of our users.
Send Inquiry to This Supplier
You May Also Like
-
Wireless Transmission Pipe Ultrasonic Flaw DetectorUS$ 8 - 2000000MOQ: 1 Pair
-
Wireless Transmission Steel Bar Ultrasonic Flaw DetectorUS$ 8 - 2000000MOQ: 1 Pair
-
Eddy Current Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
-
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02US$ 8 - 200MOQ: 1 Bag
-
BKNET-0102 Welded Pipe Eddy Current Flaw DetectorUS$ 8 - 200MOQ: 1 Bag
-
BKNET-101 Automatic Eddy Current TestingUS$ 8 - 200MOQ: 1 Bag
-
Bolt Eddy Current Sorter BKNFX-11US$ 8 - 200MOQ: 1 Bag
-
EDM NotchUS$ 8 - 200MOQ: 1 Bag
-
RQ-120-B Automatic CNC EDM NotchUS$ 8 - 200MOQ: 1 Bag
-
Magnetic Flux Leakage Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
