Contact Platform Support
Help CenterSteel Bar Testing
Related Products
-
Steel Pipe TestingUS$ 8 - 2000000MOQ: 1 Pair -
Wireless Transmission Pipe Ultrasonic Flaw DetectorUS$ 8 - 2000000MOQ: 1 Pair
-
Wireless Transmission Steel Bar Ultrasonic Flaw DetectorUS$ 8 - 2000000MOQ: 1 Pair
-
Eddy Current Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
-
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02US$ 8 - 200MOQ: 1 Bag
The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is that the original defects of the steel chain or billet are extended during the rolling process. These defects are mainly concentrated in the central part of the steel rod. The forms mainly include slag inclusion, shrinkage, delamination, and looseness. The amount of rolling deformation increases and increases. In actual production, these internal defects of the steel rod have a serious impact on the performance of the steel. For example, steel rods used for forging, these internal defects will continue to exist inside the steel rod during the forging process, and some will continue to extend. Some will form a mezzanine. Therefore, the non-destructive testing of the internal defects of steel bars has attracted more and more attention.
Wireless Transmission Steel Bar Ultrasonic Flaw Detector
Steel bar is a conventional product with high density, moderate noise. The system is suitable for automatic detection of internal and external defects of various steel bars.
LEARN MORE >
Wireless Transmission Steel Bar Ultrasonic Flaw Detector
Ultrasonic automatic detection system for steel bars
The ultrasonic automatic detection system for steel bars is a device that uses ultrasonic longitudinal wave detection to detect defects such as delamination and inclusions inside the steel bar. The steel rod enters a six-way ultrasonic probe that rotates at a high speed through a communication mechanism, and each channel is set to a different frequency. The steel rod advances at a low speed, so it can cover 100% of the surface of the steel rod. After the steel rod enters the ultrasonic system, the system begins to detect.
When a defect is detected, the probe will feed back the defect signal. The defect signal is processed, amplified, converted to the oscilloscope, and the oscilloscope is transmitted to the computer. The program in the computer responds accordingly, that is, the defect location is identified. In the subsequent production, the marked steel bar will be cut off, thereby avoiding the quality problems caused by the internal defects of the steel bar.
As a non destructive testing equipment manufacturer and supplier, we have been committed to developing and manufacturing high-quality and high-performance NDT equipment to provide customers with the best quality service.
BKN is a professional mfl suppliers. We provide Eddy Current Testing, Magnetic Flux Leakage Testing, ndt testing, ultrasonic testing of steel bars, steel bar test and so on. Want to know more? Please contact us.
Send Inquiry to This Supplier
You May Also Like
-
BKNET-0102 Welded Pipe Eddy Current Flaw DetectorUS$ 8 - 200MOQ: 1 Bag
-
BKNET-101 Automatic Eddy Current TestingUS$ 8 - 200MOQ: 1 Bag
-
Bolt Eddy Current Sorter BKNFX-11US$ 8 - 200MOQ: 1 Bag
-
EDM NotchUS$ 8 - 200MOQ: 1 Bag
-
RQ-120-B Automatic CNC EDM NotchUS$ 8 - 200MOQ: 1 Bag
-
Magnetic Flux Leakage Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
-
Benchtop Magnetic Flux Leakage Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
-
Drill Pipe Magnetic Flux Leakage Detector MFL-308US$ 8 - 200MOQ: 1 Bag
-
MFL101 Tank Floor MFL ScannerUS$ 8 - 200MOQ: 1 Bag
-
Eddy Current Testing EquipmentUS$ 8 - 200MOQ: 1 Bag
