Small Rice Husk Corn Cocnut Shell Hammer Mill Make Sawdust Hammer Mill

1.Product Description of biomass hammer mill manufacturers

 This series of biomass hammer mill have advantage of compact structure, Strong and durable, Safe and reliable, easy operation, lower noise and vibration, high efficiency and low energy consumption, etc. With double discharge to connect material and convenience to use, the spare part of the machine completely adopt quality material, outsourcing parts adopting domestic optimal product, the whole machine’s quality is reliable, long-lived.

2.Raw materials of the biomass hammer mill manufacturers

Biomass hammer mill is a new-style and widely used machine, which widely used in all kinds of shavings ,crop stalk, straw, hay, corn , soya, bagasse, sawdust, cotton firewood, bamboo powder, clover, peanuts shells, cotton seed fur, etc. 

Morevere, the size of output can be changed according to customers' requirements

3.Features of the biomass hammer mill manufacturers

1.The biomass hammer mill shell is welded by steel plate,the site in the crush room, which connects to the materials andall use the wearable and commutative parts and double wear plate.
2.Coarse and fine power can both be achieved by adjusting the gaps between hammer and the screen by changing the location of the pin rod.
3.The motor and rotor are installed in the same heavy-duty base,using coupling direct drive,the rotor are checked by dynamic balance,and can work forward and reverse,the hammers are arranged symmetrically.

4.Teachnical datas of the biomass hammer mill manufacturers

Our company has different output biomass hammer mill as follows. The customers can select one machine accordinf their capacity.

However, if these bomass hammer mill can not satisfy you needs, we can offer other machines as your special requeirements.

5.Working principle of the biomass hammer mill manufacturers

This biomass hammer mill is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.

6.Final products of the biomass hammer mill manufacturers

1.The particle size of this biomass hammer mill is small,  and can be crushed directly without drying by sun or dryer machines.

2. The whole wquipment only use a motor driving.

3.It has simple structure and compact decoration.

4. Cheap cost, stable quality, less energy consumption, and high efficiency.

The final wood chips could be used for bwiquette or pellet making or charcoal briquettes . 

wood briquette machine ( clcik the picture get more information)

wood pellet mill ( clcik the picture get more information)

  Carbonization stove (click the picture get more inforamtion )

For one set we packed in  standard container.For more sets machines, we pack them in the standard container.

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 33 years. 

 There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) , 

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine) 

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette) 

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

 Our machines have the best quality and we have got many certification such as CE, ISO, BV.

(1)Pre-sales service
a. Sales team will suggest suitable project.
b. Technical team analyse and design special molds for you.
c. Pick you up at airport, arrange hotel-booking.
d. Other travel arrangements.
(2)After-sales service
a. Assist you build up factory and production line.
b. Install and maintain machines.
c. Training your workers to achieve skillful operation.
d. Offer technical support through telephone or online videos at any time.
(3)Our shipping terms
We can accept EXW FOB and CIF terms.
Also our freight forwarding has high effieiency and quick shipping speed.
If stock machine, we can send out your products within 5 days.
If you need special molds or customized producion line, the delivery time according to you machine quantity, but we will send out as soon as possible.
(4)Our payment terms
T/T, L/C, Western Union or others.