Hardware/firmware function

Main functions

Function description

Hardware functions

Based on 2G/4G network communication

GPS + cell code positioning

Dual SIM card

Support two Micro-SIM cards, dual card single standby mode work. The device will automatically select the SIM card for network registration

Adjustable lock bar length

To adapt to the lock bar distance of different pitches

Voice prompts and indicator lights

Different voice prompts in different operating scenarios; LED lights support satellite positioning, communication status, power status, and charging status indication

DC 5V/ 2A charging

The battery can be fully charged in about 20 hours

Internal battery 30000mAh

Rechargeable lithium battery

Spare battery

Turn on the spare battery when the main battery is out of power

Serial port

Can be used for firmware upgrade, parameter configuration, DEBUG debugging

Six-axis acceleration sensor

Motion and vibration detection

Display screen (TBD)

The display displays the QR code, signal and battery

Firm functions

Location tracking

GPS+LBS

Unlock channel

The lock can be unlocked by swiping the RFID authorization card and SMS, configuration tool, mobile Bluetooth APP, and platform sending instructions

Support static password and dynamic password

The static password is valid for a long time, and the dynamic password becomes invalid after one use.

No unlocking function outside the fence

The lock can only be unlocked in the designated enclosure, by sending instructions or swiping the authorized RFID card to unlock

10 polygonal electronic fences

A fence can support up to 10 location nodes

Support the configuration of 500 authorized RFID cards for unlocking

Used to configure 500 RFID cards with authorized unlocking

Automatically lock

After sending the unlock instruction, the unlock button is not pressed, and the device will lock automatically after 1min

Remote restart

Send instructions remotely to restart the device

Support 5 authorized VIP numbers

VIP mobile phone number can support SMS command sending, SMS alarm receiving, etc.

Support 8 kinds of alarms

Overtime unlocked alarm

Enter the fence alarm

Leave the fence alarm

Low battery alarm

Back cover open alarm

Swipe illegal card alarm

Password error alarm

Speeding alarm

The alarm can be sent to the VIP mobile phone number via short message or sent to the platform via cellular network (such as GPRS/3G/4G network)

Item

Description

Dimension(L*W*H)

255*135*53mm

Length of latch

486mm

Weight

4.2kg(With standard accessories)

Shell material

Aluminum alloy + polycarbonate

Built-in battery

30000mAh rechargeable lithium battery

Operating temperature

-20℃ ~ 70℃

Storage temperature

-40℃ ~ 80℃

Relative humidity

5%~95%

Waterproof and dust-proof grade

IP67

Charging voltage/current

5V/2A

Average sleep current

2G

Enable SMS wake-up:6.9mA

Turn off SMS wake-up:1.91mA

4G

Enable SMS wake-up:14.4mA

Turn off SMS wake-up:2.17mA

Average working current

2G :30.3mA

4G :48.7mA

GNSS/ Cellular module antenna

Built-in

GNSS module

Ublox-MAX-8Q

Cellular module communication frequency band

2G module

GSM/EDGE 850/900/1800/1900Mhz

4G full band

4G LTE frequency band: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19

/B20/B25/B26/B28/B34/B38/B39/B40/B41/B66

UMTS/HSPA+: B1/2/B4/B5/B6/B8/B19

GSM/GPRS/EDGE: 850/900/1800/1900MHz

SIM card

Micro-SIM card, dual SIM card

Bluetooth

Support Bluetooth 5.0

Receiving sensitivity -97dBm

Maximum transmission rate 2Mbps

Bluetooth communication distance: 2-10 meters

Maximum transmit power 0dBm