Contact Platform Support
Help CenterWaste Aluminum Molten Die Casting Casting Furnace Aluminum Ingot Furnace 5 Tons of Fuel Gas Molten Aluminum Furnace
Related Products
-
5T Crucible Furnace， Various Types of Crucible Furnaces Can be CustomizedUS$ 65000 - 620000MOQ: 1 Short Ton -
10 Ton Crucible Furnace is Safe and Simple to Operate. Gas Crucible FurnaceUS$ 60000 - 65000MOQ: 1 Short Ton
-
Industrial Gas Crucible Furnace Occupies a Small AreaUS$ 65000 - 70000MOQ: 2 Short Tons
-
Industrial Natural Gas Furnace，copper Melting Furnace， Crucible Furnace 500 kgNegotiableMOQ: 2 Sets
-
The Small Oil Fired Copper Melting Furnace， Directly Supplied by the Manufacturer， Has Fast Temperature RiseCNY 65000 - 72000MOQ: 2 Sets
The feeding port, bottom, flow port and other parts of aluminum melting furnace are usually short in life because of the frequent work and impact. However, the furnace wall and top of the liquid level net are still intact even in the maintenance period of the aluminum melting furnace.
The outlet of the aluminum melting furnace is located at the junction of the furnace wall and the bottom of the furnace, which undertakes the work of poking holes frequently. It is often the problem of abnormal furnace condition and slag formation at the bottom of the furnace, so that the life of the outlet brick is far shorter than that of other parts of the furnace lining.
As the material pile slowly did not enter the liquid surface, the melt below the liquid surface showed a solid-liquid mixture. After the level of liquid in the furnace, on the one hand, because of the reduction of the actual effect of heat conduction, the structure of aluminum melting resistance furnace on the other hand, by the necessity of heterogeneous phase conversion, the melting process becomes more and more slow, must take longer, consume a lot of heat.
In addition, the discharge temperature is also higher. When all the solid aluminum in the furnace is converted into liquid aluminum, the heat load of the melt must be greatly reduced, and the temperature of the liquid aluminum increases rapidly, so it is very easy to appear the melt overtemperature. The actual operation of refining and heat insulation requires less heat. The key to supply heat load is to fill the heat dissipation damage of furnace wall heat pipe.
Send Inquiry to This Supplier
You May Also Like
-
Fast Heating Crucible Furnace, Directly Supplied by Gas Crucible Furnace ManufacturerCNY 80000 - 85000MOQ: 1 Set
-
Small Gas Crucible, Fast Temperature Rise, Fast Delivery and Good ServiceCNY 80000 - 85000MOQ: 2 Sets
-
Regeneration Smelting Furnace Equipment Tongchuang Supply Small Gas Crucible FurnaceUS$ 1.1 - 2.1MOQ: 1 Set
-
Waste Aluminum Smelting Equipment, Small Gas Crucible FurnaceCNY 65000 - 72000MOQ: 1 Set
-
The Temperature Rise of Waste Copper Reduction Furnace is Faster Than That of 6-ton Gas-fired Copper Melting FurnaceCNY 65000 - 72000MOQ: 1 Set
-
Rotary Furnace, Rotary Furnace for Waste Aluminum Treatment, 6T Dump Rotary FurnaceCNY 65000 - 70000MOQ: 1 Set
-
Medium Frequency Furnace Equipment, Precious Metal Refining Furnace, Copper Melting Furnace Heating up QuicklyCNY 60000 - 65000MOQ: 1 Set
-
Waste Copper Melting Furnace, Delivery Quick Casting Heat Treatment, Dumping Crucible FurnaceCNY 62000 - 66000MOQ: 1 Set
-
Multi-specification Melting Furnace Crucible Furnace for Casting Heat TreatmentCNY 62000 - 66000MOQ: 1 Set
-
Nonferrous Metal Smelting 5 Tons of Large Fuel Gas Aluminum Melting FurnaceUS$ 62000 - 66000MOQ: 1 Short Ton
