Contact Platform Support
Help CenterStainless Steel Suction Line Strainer That Fits Over 3/8" NPT
Related Products
-
Stainless Steel Airless Suction Inlet Stainer MeshNegotiableMOQ: 500 Pieces -
Stainless Steel Amspray Suction Inlet Stainer MeshNegotiableMOQ: 500 Pieces
-
Stainless Steel ASM Suction Inlet Stainer MeshNegotiableMOQ: 500 Pieces
-
Stainless Steel Bedford Suction Inlet StrainerNegotiableMOQ: 500 Pieces
-
PowrLiner Rock Catcher Stainless Steel Inlet Strainer ScreenNegotiableMOQ: 500 Pieces
Suction Inlet Strainer Mesh
The Suction Series Strainer promotes a compact design with multiple configurations to fit the exact end use application.
The Standard Suction Strainer has a molded 304 Stainless Screen.A Stainless steel Body with 304 Stainless Screen is available.
Suction Strainers have a Female Friction Fit and are called out according to the size of a Female NPT fitting.
Suction Strainers have a true threaded Female NPT connection.
Raw Material of wire and Threading .
1.4301/SUS304/AISI304/STS304
1.4306/SUS304L/AISI304/STS304L
1.4401/SUS316/AISI316/STS316
1.4404/SUS316L/AISI316L/STS316L.
Size: Stainless steel Body Options 1/4, 3/8, 1/2, 3/4, 1, 1-1/2
Female NPT ,1/4, 3/8 Hose Barb
Stainless steel Body Options 1/2, 3/4, 1 Female NPT
Mesh normal size :12,16,18 ,20, 30, 40 (Standard), 60,80 Mesh
Layer : single layer or double layers are available
Single screen
Single mesh Thread 1” 10mesh
Single mesh Thread 1” 15mesh
Single mesh Thread 1/2” 15mesh
Single mesh Thread 3/4” 15mesh
Double Mesh
Suction Filter Thread 3/8” 30mesh
Suction Filter Thread 3/4” 30mesh
Suction Filter Thread 1” 30mesh
Suction Filter Thread 1/2” 30mesh
Suction Filter Thread 3/8” 60mesh
Suction Filter Thread 3/4” 60mesh
Suction Filter Thread 1” 60mesh
Suction Filter Thread 1/2” 60mesh
Glory suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.For service and used to manufacture of spray finishing equipment. atomizing nozzles and air caps and spray guns. the industrial and automotive spray finishing industry.
Send Inquiry to This Supplier
You May Also Like
-
Stainless Steel Amspray Suction Suction Filters for BarrelNegotiableMOQ: 500 Pieces
-
Stainless Steel Replacement Part for Still Suction FilterNegotiableMOQ: 500 Pieces
-
Stainless Steel Floating Suction Filter MeshNegotiableMOQ: 500 Pieces
-
Stainless Steel Suction Hose Filter MeshNegotiableMOQ: 500 Pieces
-
Pump Suction Filters MeshNegotiableMOQ: 100 Pieces
-
Pump Suction Filters ScreenNegotiableMOQ: 100 Pieces
-
Suction ScreenNegotiableMOQ: 100 Pieces
-
Filters Hydraulic Suction ScreenNegotiableMOQ: 100 Pieces
-
Suction Baskest NetNegotiableMOQ: 200 Pieces
-
Suction Baskest MeshNegotiableMOQ: 200 Pieces
