Home > Products > Curtis Controller > Electric Golf Cart DC Motor Curtis 1243-4220 Controller
Electric Golf Cart DC Motor Curtis 1243-4220 Controller
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
- Curtis PM Controller for Electric Machine
- Curtis Series Motor Controller 1205M-5603 Motor Controller
- Electric Self-Build Golf Cart Motor Controller 1212S-2601
- Curtis 1510A-5201 Controller made in USA
- Curtis 1221M-6701 DC Motor Controller 550A 60V Series Motor Controller
- Curtis 1207B-4102 Motor Controller 24V for Forklift
Product Description
Product Description
Overview:
Mating Connectors
CURTIS 1243 Generation II MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of
small industrial vehicles and in material handling equipment. These programmable controllers are simple to install, efficient, and
cost effective, while offering more features than the original 1243.
The 1243 GEN2 MultiMode™ controller provides smooth precise control of motor speed and torque. A full-bridge field control stage
is combined with a half-bridge armature power stage to provide solid state motor reversing and full regenerative braking without
additional relays or contactors. The controller’s rugged IP53 housing and packaging are built to withstand shock and vibration.
State-of-the-art surface mount logic board fabrication makes the 1243 GEN2 controller even more reliable than the original 1243.
The 1243 GEN2 is fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. In
addition to configuration flexibility, the programmer provides diagnostic and test capability.
Appropriate throttles for use with the 1243-4220 controller include:
* Type 1: 2-wire 5kΩ–0 throttles
* Type 2: 0–5V throttles, current source throttles, three-wire potentiometer throttles, and electronic throttles wired for
singleended operation
* Type 3: 2-wire 0–5kΩ throttles
* Type 4: 0–5V and three-wire potentiometer throttles wired for wigwag operation
Mating Connectors
CURTIS 1243 Generation II MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of
small industrial vehicles and in material handling equipment. These programmable controllers are simple to install, efficient, and
cost effective, while offering more features than the original 1243.
The 1243 GEN2 MultiMode™ controller provides smooth precise control of motor speed and torque. A full-bridge field control stage
is combined with a half-bridge armature power stage to provide solid state motor reversing and full regenerative braking without
additional relays or contactors. The controller’s rugged IP53 housing and packaging are built to withstand shock and vibration.
State-of-the-art surface mount logic board fabrication makes the 1243 GEN2 controller even more reliable than the original 1243.
The 1243 GEN2 is fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. In
addition to configuration flexibility, the programmer provides diagnostic and test capability.
Appropriate throttles for use with the 1243-4220 controller include:
* Type 1: 2-wire 5kΩ–0 throttles
* Type 2: 0–5V throttles, current source throttles, three-wire potentiometer throttles, and electronic throttles wired for
singleended operation
* Type 3: 2-wire 0–5kΩ throttles
* Type 4: 0–5V and three-wire potentiometer throttles wired for wigwag operation
Product Paramenters
Key features:
* CURTIS Model: 1243-4220
* Norminal Battery Voltage (Volts): 24V or 36V
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input voltage (minimum): 16.8 V
* KSI input current (typical): * 78 mA without programmer
* 120 mA with programmer
* Logic input voltage: 7.5 V High; <1 V Low
* Logic input current 15 mA
* Overvoltage protection: * 24V models: cutback at approx. 30V, cutback at ≈34V
* 36V models: cutback at approx. 45V, cutback at ≈49V
* Undervoltage protection: * 24V models: cutback at approx. 17V, cutback at ≈13V
* 36V models: cutback at approx. 25V, cutback at ≈21V
* Drive Current Limit (amps): 200 * Amature: * 2 Minute Current Rating (amps): 200
* 1 Hour Current Rating (amps): 80
* Field: * 2 Minute Current Rating (amps): 25/35
* 1 Hour Current Rating (amps): 15/20
* Throttle Type: 0-5K Ω (default setting), 5K-0 Ω or 0-5V
* Ambient operating temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: 85°C
* Heatsink undertemperature cutback: -25°C
* Package environmental rating: IP53
* Dimensions: L198 × W114 × H70 mm
* Net Weight: 1.45 kg
* Regulatory compliance * Safety, applicable portions: EN 1175-1:1998
* EMC and EMI: EN 12895:2000
* UL Recognized Component, UL File AU1841
Features also include:
* Interlock braking with load sensor to meet required braking distance without unnecessary harsh braking at light loads
* Maintenance monitor responds to preset vehicle operating hours and drive hours as programmed by the OEM
* Two hourmeters - total KSI-on hours and traction hours - and the associated maintenance timers are built into the controller
* BDI calculations performed within controller
* Estimates motor temperature based on field resistance and cuts back maximum speed if the motor is overheated
* Diagnostic checks for field open and field shorted faults
* Supports PWM electromagnetic brake with maximum continuous current of 2 amps
* Supports Type 4 throttle
* Active precharge of controller capacitor bank extends life of main contactor
* Compatibility with CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station for quick and easy testing, diagnostics,
and parameter adjustment
* MultiMode™ allows four user-selectable vehicle operating modes
* Continuous armature current control, reducing arcing and brush wear
* Complete diagnostics through the handheld programmer, the built-in Status LED, and the optional 840 Spyglass display
* Two fault outputs provide diagnostics to remotely mounted displays
* Regenerative braking allows shorter stopping distances, increases battery charge, and reduces motor heating
* Automatic braking when throttle is reduced provides a compression braking feel and enhances safety
* Brake/Drive Interlock meets ISO stopping distance requirements
* Ramp restraint feature provides automatic electronic braking that restricts vehicle movement while in neutral
* Meets EEC fault detect requirements
* Linear cutback of motor drive current during overtemperature or undervoltage
* Linear cutback of regenerative braking current during overvoltage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Internal and external watchdog circuits ensure proper software operation
* Fully protected inputs and short-circuit protected output drivers.
* CURTIS Model: 1243-4220
* Norminal Battery Voltage (Volts): 24V or 36V
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input voltage (minimum): 16.8 V
* KSI input current (typical): * 78 mA without programmer
* 120 mA with programmer
* Logic input voltage: 7.5 V High; <1 V Low
* Logic input current 15 mA
* Overvoltage protection: * 24V models: cutback at approx. 30V, cutback at ≈34V
* 36V models: cutback at approx. 45V, cutback at ≈49V
* Undervoltage protection: * 24V models: cutback at approx. 17V, cutback at ≈13V
* 36V models: cutback at approx. 25V, cutback at ≈21V
* Drive Current Limit (amps): 200 * Amature: * 2 Minute Current Rating (amps): 200
* 1 Hour Current Rating (amps): 80
* Field: * 2 Minute Current Rating (amps): 25/35
* 1 Hour Current Rating (amps): 15/20
* Throttle Type: 0-5K Ω (default setting), 5K-0 Ω or 0-5V
* Ambient operating temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: 85°C
* Heatsink undertemperature cutback: -25°C
* Package environmental rating: IP53
* Dimensions: L198 × W114 × H70 mm
* Net Weight: 1.45 kg
* Regulatory compliance * Safety, applicable portions: EN 1175-1:1998
* EMC and EMI: EN 12895:2000
* UL Recognized Component, UL File AU1841
Features also include:
* Interlock braking with load sensor to meet required braking distance without unnecessary harsh braking at light loads
* Maintenance monitor responds to preset vehicle operating hours and drive hours as programmed by the OEM
* Two hourmeters - total KSI-on hours and traction hours - and the associated maintenance timers are built into the controller
* BDI calculations performed within controller
* Estimates motor temperature based on field resistance and cuts back maximum speed if the motor is overheated
* Diagnostic checks for field open and field shorted faults
* Supports PWM electromagnetic brake with maximum continuous current of 2 amps
* Supports Type 4 throttle
* Active precharge of controller capacitor bank extends life of main contactor
* Compatibility with CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station for quick and easy testing, diagnostics,
and parameter adjustment
* MultiMode™ allows four user-selectable vehicle operating modes
* Continuous armature current control, reducing arcing and brush wear
* Complete diagnostics through the handheld programmer, the built-in Status LED, and the optional 840 Spyglass display
* Two fault outputs provide diagnostics to remotely mounted displays
* Regenerative braking allows shorter stopping distances, increases battery charge, and reduces motor heating
* Automatic braking when throttle is reduced provides a compression braking feel and enhances safety
* Brake/Drive Interlock meets ISO stopping distance requirements
* Ramp restraint feature provides automatic electronic braking that restricts vehicle movement while in neutral
* Meets EEC fault detect requirements
* Linear cutback of motor drive current during overtemperature or undervoltage
* Linear cutback of regenerative braking current during overvoltage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Internal and external watchdog circuits ensure proper software operation
* Fully protected inputs and short-circuit protected output drivers.
related products
our factory
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Packing & Delivery
Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our
sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Please feel free to contact us if you have any problem!
Contact Us
- Hefei Huanxin Technology Development Co., Ltd.
Product Categories
New Products
- Original Curtis AC Motor Controller from Bulgaria
- Wholesale home-made 36-48V 500A EV DC Series Motor Controller 1215-8307
- Curtis AC Motor Controller 24V 180A 1232E-2321 for electric buggy
- Curtis 1232-2371 AC Motor Controller 24V 350A for Electric Pallet
- DC Motor Curtis Controller 1221M-6701
- 1244-5561 SepEx DC Controller 500A 48V
- Curtis 1227 DC Motor Controller 36V for Electric Pallet Truck
- Curtis 1228 DC Motor Controller for Floor Washing Machine
- Curtis 1238-6501 Motor Controller 550A 48-80V
- 350A 48V-80V Curtis Motor Controller 1238-6401
- Electric Forklift DC Motor Controller 1204M-5203 36V
- Curtis 1268-5403 Controller eve conversion kits for Electric Sightseeing Bus
- 1205M Curtis Motor Controller with Latest Technology
- Curtis AC Controller 1230-2402 for Electric Forlift
- Curtis AC 1234-5371 Controller 350A
- Curtis 1229-3101 Controller 24V-36V 200A
- Curtis 1204M-5305 Motor Controller for electric forklift golf cart eve conversion kit
- 1205M-6B402 Controller 60V 400A Made in USA
- Speed controller AC motor controller Curtis 1234-5371 36/48v with 350A
- Original Curtis Brand 1234E-5321 AC Motor Controller
- Advanced Design Curtis DC Controller 1215-8307 36V/48V-500A For Pallet Trucks
- Motor Controller 1207B-5101 Upgraded for 1207A-5101 24V 300A Fits for Curtis
- 1212P-2502 CURTIS Controller 24V Electric Motor Controller 90A
- 36v 48v 275a 1266a-5201 Golf Cart Motor Controller Replacement For 1510a-5251 Curtis Controller For Golf Cart
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebikes
- cart control
- dc controls
- dc dc controller 2012
- dc lift motor controler
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- animation motor controller
- at motor controller
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor Accessories > Motor Controller
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-