Contact Platform Support
Help Center64 Port High Power Fiber Optic Amplifier EDFA
Related Products
-
4 Port EDFA High Power 1550nmUS$ 200 - 200MOQ: 1 Unit -
Light Source Optical Meter and Visual Fault Locator Integrated Multi-Function OTDRUS$ 100 - 150MOQ: 1 Unit
-
Cost-Effective 3000 Series Optical Time Domain Reflectometer (OTDR)US$ 100 - 150MOQ: 1 Unit
-
BD900 Series Smart Optical Time Domain Reflectometer OTDRUS$ 100 - 150MOQ: 1 Unit
-
24E1 Gigabit Ethernet AggregatorUS$ 300 - 350MOQ: 1 Unit
64 Port EDFA WDM has 64 ports, dual power, support SNMP network management. The 64 Port EDFA WDM is a 64 port C-Band Er-Yb co-doped double cladding fiber optic amplifier with a high output power. The double cladding optical fiber and the high reliability multimode PUMP laser are the product’s main features. The high stability and dependability output power is ensured by Automatic Power Control circuit and a proprietary ATC (Automatic Temperature Control), while the unique optical circuit design assures exceptional optical performance. The MPU system’s excellent stability and precision enable simple and intelligent operation, adjustment and display.
The fiber amplifier uses double cladding Erbium Ytterbium co-doped fiber and a high power multimode pump, which has a 10 times higher conversion efficiency than single-mode general technology, and thus has a lower cost, smaller size, and lower power consumption, making it ideal for FTTH, FTTB, and other large-scale distribution system applications.
Features◆High Power：Up to 2W total，1 Unit for 2000～4000 optical node
◆Low Noise Figure：Below 5.5dB ( +5dBm input)
◆Er Yb co-doped DCF Amplify Technology：Patent Pump Dump Technology
◆Low CSO: ＜-70dBc
◆23dBm×N，20dBm×N or 17dBm×N output is optional
◆Controllability and maneuverability: Dual CPU to deal Control loop and Communication separately
◆High Stability And Reliability：MTTF＞150000 Hours
◆Redundancy Hot Swap power module: 110/220VAC and 48VDC can plug Mix
◆Perfect Network Interface：Ethernet
◆Support SNMP network management
◆Intelligent Temperature Control System: using a dedicated Temperature control chip which make cooling and power loss reduce 30% than competitors
◆Output Power can be Adjustable by network and manual
◆Integrated 1310nm，1490nm，1550nm WDM (Optional)
◆OEM, Module is available
Block Diagram
Front-Panel、Back-Panel
Note 1：Optional Note 2：Tested at +5dBm Input Note: No Condensate 1: 110VAC，220VAC and -48VDC is optional, and duplicate supply is optional. ◆Analog CATV Transmission ◆FTTH Optical Access ◆Optical Distribution ◆Free Space Optical ◆R&D and Training
Send Inquiry to This Supplier
You May Also Like
-
E1 to 4*10/100BaseT Ethernet Converter With Local ManagementUS$ 300 - 350MOQ: 1 Unit
-
G703 E1 to Ethernet Converter | Ethernet Over E1US$ 300 - 350MOQ: 1 Unit
-
Framed E1 to 4 10/100BaseT Ethernet Converter With Enhanced ManagementUS$ 300 - 350MOQ: 1 Unit
-
2 Ethernet Over 2E1 Convergency ConverterUS$ 300 - 350MOQ: 1 Unit
-
4 E1 TDM Over IPUS$ 100 - 200MOQ: 1 Unit
-
E1 Over Fast Ethernet TDMoIP ConverterUS$ 100 - 200MOQ: 1 Unit
-
V.35 Over Ethernet IP Converter TDMoIPUS$ 150 - 200MOQ: 1 Unit
-
16 E1 Over Ethernet TDM Over IP ConverterUS$ 150 - 200MOQ: 1 Unit
-
4E1 Over Gigabit Ethernet MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
E1 Over Ethernet TDM Over IP ConverterUS$ 150 - 200MOQ: 1 Unit
