Contact Platform Support
Help Center16 E1 Over Ethernet TDM Over IP Converter
Related Products
-
4E1 Over Gigabit Ethernet MultiplexerUS$ 150 - 200MOQ: 1 Unit -
E1 Over Ethernet TDM Over IP ConverterUS$ 150 - 200MOQ: 1 Unit
-
STM-1 Over Gigabit Ethernet TDM Over IP MultiplexerUS$ 100 - 200MOQ: 1 Unit
-
8E1 TDM Over IP | 8 E1 Over IP MuxUS$ 100 - 200MOQ: 1 Unit
-
2E1 Over Ethernet TDM Over IP MultiplexerUS$ 100 - 200MOQ: 1 Unit
As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-16E1-IP adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 16 E1 over FE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100 auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
The 16E1 TDM over IP converter provide 2 power supply, 16 E1,2FE uplink 2FE downlink and one optical FE SFP slot.
Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios.
1. Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
2. Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 user data ports or monitoring ports, optical port can be used for uplink or user data.
3. User-friendly Web server supported for easy setup and maintenance
4. Support SNMP V1/V2 network management
5. E1 clock supports 3 mode: local clock, adaptive and loopback
6. E1 service support lossy and lossless protection
7. E1 support local and remote loops
8. Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
9. Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet ring protection, OAM and MAC address automatic learning
10. Ethernet packet size up to 9720byte
11. Support point to point (working pair, one at each end of the network) and point to multipoint application
12. Local Ethernet port throughput limiting
13. Software and hardware online upgrade
14. Power supply redundancy
15. 120Ω balanced E1/T1 port, RJ-45 connector, support 75Ω unbalanced port through outside converting cable.
16. Support cascade concatenate for more than 16 E1 ports
Send Inquiry to This Supplier
You May Also Like
-
16E1 Over Gigabit Ethernet Multiplexer 16E1 Over IPUS$ 100 - 200MOQ: 1 Unit
-
E1 STM1 STM4 SDH Over Gigabit Ethernet Multi-service PlatformUS$ 200 - 250MOQ: 1 Unit
-
4 E1 TDM Over IP | 4E1 Over Ethernet MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
16E1 to 4Ethernet Convergence Protocol ConverterUS$ 150 - 200MOQ: 1 Unit
-
Ethernet Over TDM 16 E1 to Ethernet ConverterUS$ 150 - 200MOQ: 1 Unit
-
8E1 to Ethernet GFP ConverterUS$ 150 - 200MOQ: 1 Unit
-
4 E1 to Ethernet GFP ConverterUS$ 150 - 200MOQ: 1 Unit
-
Managed Four Slots Chassis Media ConverterUS$ 150 - 200MOQ: 1 Unit
-
Managed Chassis Media ConverterUS$ 200 - 300MOQ: 1 Unit
-
Unmanaged Gigabit Media Converter 17Slots Rack ChassisUS$ 200 - 300MOQ: 1 Unit
