Bright Annealed Tubes
- 5000 Ton / Tons per Month
- T/T L/C
- 20 days
Product Details
Thickness: | 0.25, 5 | Section Shape: | Round | Outer Diameter: | 0.25, 50.8 |
Product Description
Bright Annealed Tubes Description
Bright annealed stainless steel tubing is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainless steel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the annealed tubing with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is bright annealed stainless' s special advantage, compared with the regular one.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel offers discount bright annealed seamless steel pipe used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealing Advantages
1. Superior Surface Finish
2. Better Mechanical Property
3. More Precise Dimension
Bright Annealed Tubes Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubing sizes:
Bright Annealed Tube Materials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Fe | Al | Co | Zr | Nb | Tu | Va | |
Max | Max | Max | Max | Max | Max | Max | Max | Max | Max | ||||||||||
Nickel Alloy | |||||||||||||||||||
Inconel 600/No6600/2.4816 | 0.15 | 0.5 | 1 | 0.015 | 14-17 | ≧72 | 0.5 | 6.0-10.0 | |||||||||||
Inconel 600/No6601/2.4851 | 0.1 | 0.5 | 1.5 | 0.015 | 21-25 | 58-63 | 1 | 1.0-1.7 | |||||||||||
Inconel 690/No6690 | 0.05 | 0.5 | 0.5 | 0.015 | 27-31 | 58 | 0.5 | 7.0-11.0 | |||||||||||
Inconel 625/No6625/2.4856 | 0.1 | 0.5 | 0.5 | 0.015 | 0.015 | 20-23 | ≧58 | 8.0-10.0 | ≦0.4 | 5 | ≦0.4 | 3.15-4.15 | |||||||
Inconel 718/No7718/2.4668 | 0.08 | 0.35 | 0.35 | 0.015 | 0.015 | 17-21 | 50-55 | 2.8-3.3 | 0.65-1.15 | 0.006 | 0.3 | Remainder | 0.2-0.8 | 4.75-5.5 | |||||
Incoloy 800/No8800/1.4876 | 0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.15-0.6 | 0.75 | ≧39.5 | 0.15-0.6 | |||||||||
Incoloy 800H/No8810/1.4958 | 0.05-0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.6-1.2 | 0.75 | ≧39.5 | 0.15-0.6 | 1 | ||||||||
Incoloy 825/No8825/2.4858 | 0.05 | 0.5 | 1 | 0.03 | 19.5-23.5 | 38-46 | 2.5-3.5 | 1.5-3 | ≧22 | 0.2 | |||||||||
C-276/No10276/2.4819 | 0.01 | 0.08 | 1 | 0.04 | 0.03 | 14.5-16.5 | Balance | 15.0-17.0 | 4.0-7.0 | 2.5 | 3-4.5 | 0.35 | |||||||
Monel 400/No4400/2.4360 | 0.3 | 0.5 | 2 | 0.024 | ≧63 | 28-34 | 2.5 | ||||||||||||
Monel K-500/No5500 | 0.18 | 0.5 | 1.5 | 0.01 | 63 | 0.35-0.85 | 27-33 | 2 | 2.3-3.15 | ||||||||||
Alloy 20/No8020/2.4660 | 0.07 | 1 | 2 | 0.045 | 0.035 | 19-21 | 32-38 | 2.0-3.0 | 3.0-4.0 | Balance | 8C-1 | ||||||||
Alloy 28/No8028 | 0.03 | 1 | 2.5 | 0.03 | 0.03 | 26-28 | 30-34 | 3.0-4.0 | 0.6-1.4 | Remainder | |||||||||
Duplex Steel | |||||||||||||||||||
S31803/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 21-23 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | ||||||||||
S32205/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 22-23 | 4.5-6.5 | 3.0-3.5 | 0.14-0.2 | ||||||||||
S32750/1.4410 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24-26 | 6.0-8.0 | 3.0-3.5 | 0.24-0.32 | 0.5 | |||||||||
S32760/1.4501 | 0.05 | 1 | 1 | 0.03 | 0.01 | 24-26 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | |||||||||
Austenitic | |||||||||||||||||||
304/1.4301 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8-10.5 | ||||||||||||
304L/1.4307 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-12.0 | ||||||||||||
304H/1.4948 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-11.0 | ||||||||||||
316/1.4401 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 11.0-14.0 | 2.0-3.0 | |||||||||||
316L/1.4404 | 0.035 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | |||||||||||
316H/1.4919 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.1 | ||||||||||
316Ti/1.4571 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) | ||||||||||
321/1.4541 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | 0.7>5x(C+N) | |||||||||||
321H/1.4878 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | H | |||||||||||
317/1.4449 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-14.0 | 3.0-4.0 | |||||||||||
317L/1.4438 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-15.0 | 3.0-4.0 | |||||||||||
347/1.4550 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | ||||||||||||
347H/1.4912 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-13.0 | ||||||||||||
310S/1.4845 | 0.08 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | 0.11 | |||||||||||
310H/1.4845 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | ||||||||||||
N08904(904L)/1.4539 | 0.02 | 1 | 2 | 0.045 | 0.03 | 19-23 | 23.0-28.0 | 4.0-5.0 | 0.1 | 1.0-2.0 | |||||||||
S31254(254Mo)/1.4547 | 0.02 | 0.8 | 1 | 0.03 | 0.01 | 19.5-20.5 | 17.5-18.5 | 6.0-6.5 | 0.18-0.22 | 0.5-1.0 |
Bright Annealed Tube Pressure Calculation Formula
1. When the seamless bright annealed tube outer diameter, specifications, wall thickness is given, to calculate the withstanding pressure (different tensile strength for different steel tube materials )
Pressure =(wall thickness * 2 * tensile strength of steel tube)/(outer diameter * coefficient)
2. The calculation method for the wall thickness when seamless bright annealed tube pressure and outer diameter is given:
Wall thickness =(pressure * outer diameter * coefficient)/(2* tensile strength of steel tube)
3. Pressure coefficient of seamless bright annealed tube:
Steel tube pressure P<7Mpa coefficient S=8
7
The pipe pressure P>17.5 coefficient S=4
Contact Us
- WENZHOU HUASHANG STEEL CO.,LTD
- Contact nameLucy Zhang
- Phone86-0577-86383608
- AddressLongwan District Wenzhou,Zhejiang
sstubecn | sstubecn2021 | sstubecn0001 | 20220224 |
- Iron Square Pipe Tube / Black Iron Galvanized Square Pipe Zinc Steel Rectangular Gi Metal Galvanized Square Tube
- Customized Wholesale Galvanized Welded Pipe 2x4 S355 S275JR ERW Square Rectangular Steel Hollow Section Tube Pipe
- Best wholesale Q235B Carton steel square pipe Astm A36 A53 Carbon Steel Rectangular tube/pipe price
- ERW Hollow Section Square Rectangle galvanized Welded Steel Pipe Q355B
- Factory Outlet Super low price ASTM carbon steel pipe 20 cm square carbon steel seamless welded pipe
- Square Rectangle Round pipe Hollow Iron Pipe Welded Black Steel Pipe Tube
- Best price Cold Bending Welded Square Tube made in China factory
- Square tube carbon steel pipe black hollow section carbon steel Q235 square metal tube
- Factory supplier black carbon steel mild steel erw steel pipe welded pipes and square tubes
- 40x40 Structural Steel Square Pipe Ms Square Pipe Weight Welded Tube
- China Supplier Wholesale Steel Square Black Pipe Black Steel Square Welded Tube
- High quality hollow section carbon steel Q235 Galvanized square rectangular pipe
- VIT
- Factory Direct Sell Ms ERW Welded Carton Thick Wall Steel Pipe Seamless Hollow Section Steel Tube
- Welded Steel Pipes Stainless Carbon Steel Welded Pipe Erw Straight Welded Steel Pipe Round 304
- Factory Price round carbon steel pipe/tube welded pipe 2mm 4mm 6mm thickness
- Round welded pipes stainless steel pipe 201 304 316 stainless steel pipe
- Hot sale & high quality carbon round steel pipe welded round steel pipe carbon welded steel tube
- 14inch carbon steel pipe Seamless steel pipe and Welded steel pipe
- Manufacturer Direct Selling Stainless Steel Pipes welded Steel Micro Tube Round Steel Tube
- ASTM A53 Cold rolled pre galvanized welded round steel pipe SS400 hollow section prefab house steel tube
- Iron Pipe 6 Meter Welded Steel Pipe Round Erw Black Carbon Steel Pipe
- China Stainless Steel Decorative Hollow Pipe Seamless/Welded Round/Square Tube
- Seamless Steel Pipe And Tube Hot Sale High Quality Carbon Steel Round Seamless Pipe
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Pipes
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Lucy Zhang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-