Non-Torsion Resistant Aluminium Alloy (8030) Conductor Wind Power Cable Up To 1.8/3kV
These cables are used to transmit the power energy for wind turbine. It can not be used for torsion resistant.
STANDARD:
GB/T 29631-2013, IEC60502-1 , Shangshang specifications, or other standards on request.
Conductor: aluminium alloy (8030) , as per IEC60228 .
Insulation: Ethylene propylene rubber (EPR)
Sheath: neoprene rubber or similar elastomer compound, black
RANGE OF SIZE:
Number of Cores |
Nominal cross-sectional area |
1-Core |
10mm2~630mm2 |
CORE IDENTIFICATION:
1-Core: black, white, or natural, etc.SHEATH COLOR:
Black
SPECIAL FEATURES:
Max. conductor temp. in service |
Max. short circuit temp. (5s) |
Min. operating ambient temperature |
Min. bending radius |
Send Inquiry to This Supplier
You May Also Like
-
Photovoltaic Wire,Type PV,UL StandardNegotiableMOQ: 1 Piece
-
Class 1E Category K1 Nuclear Cables Used Inside ContainmentNegotiableMOQ: 1 Piece
-
Photovoltaic Cables,Type PV1-F,TüV SpecificationNegotiableMOQ: 1 Piece
-
Class 1E Category K3 Nuclear Cables Used Outside ContainmentNegotiableMOQ: 1 Piece
-
Torsion Resistant Wind Power Cable 8.7/15kVNegotiableMOQ: 1 Piece
-
Torsion Resistant Wind Power Cable Up To 26/35kVNegotiableMOQ: 1 Piece
-
Non-Torsion Resistant Wind Control Cable 300/500VNegotiableMOQ: 1 Piece
-
Non-Torsion Resistant Wind Data Control Cable(Twisted Pair) 300/500VNegotiableMOQ: 1 Piece
-
Torsion Resistant Wind Control Cable 300/500VNegotiableMOQ: 1 Piece
-
Torsion Resistant Wind Data Control Cable(Twisted Pair) 300/500VNegotiableMOQ: 1 Piece





