Contact Platform Support
Help Center8Channel Voice(FXS/FXO) Phone Over Fiber Multiplexer
Related Products
-
30 Channel POTs Over Fiber MultiplexerUS$ 200 - 200MOQ: 1 Unit -
16 Ports Voice Fiber Multiplexer | Voice MultiplexerUS$ 200 - 200MOQ: 1 Unit
-
256 Phone Over Fiber Optical MultiplexerUS$ 250 - 280MOQ: 1 Unit
-
360 POTS Phone Over Fiber MultiplexerUS$ 250 - 280MOQ: 1 Unit
-
5-Port Ethernet Switch, With DIP Switch, One-key Port IsolationUS$ 150 - 200MOQ: 1 Unit
The voice over fiber multiplexer is point to point fiber transmitting equipment, which realizes 1~8 channel voice (FXO, FXS) POTs phone over fiber and 4 E1,4*100M Ethernet, 4 channel RS232 for option. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.
Features
provides 4 channel E1/ G.703 for option;
provides 1 channel 100M (liner) Ethernet ports for option
provides 8 channel voice port, FXO and FXS for option; also for 2/4 wire E&M
provides 4 channel RS232, rate supports 300-15200 bps for option;
Ethernet port 10/100M, full/half duplex auto-adaptable and supports VLAN;
Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
1-8 channel voice connection, supports calling indication;
Configuration: point to point;
Voice port supports O port and S port or E&M interface for order, O port connects switch and S port connects user’s phone;
Optical interface supports SC/FC interface and supports single fiber interface
Optical interface Optical wavelength: single mode 1310nm/1550nm Fiber: single fiber or double fiber for option Transmitting consumption: -9dBm/-5dBm Transmission range: 0-50Km/120Km for option Optical interface: SC/FC Receiving and dispatching module: >-6dBm Optical receiver receiving sensitivity -11) Fiber circuit code: NRZ code Ethernet Interface Rate: 10/100M, full/duplex auto-negotiation Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Entiries: 4096 Entiries Total Memory Sizes: 64MBits SDRAM Physical interface: RJ45, support AUTO-MDIX FXS: Alarm voltage: 75V Alarmf requency: 25HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db FXO: Alarm detecting voltage: 35V Alarm detecting frequency: 17HZ-60HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db E wire: Max current： 22mA Saturation voltage: 3V Dial speed： >20pps M wire： steady current： 7 mA min test current： 5 mA pluse dial recognition: >20pps RS232 port Rate： 300－115.2Kbps auto-adaptable (Asynchronous) Interface characteristic： satisfies ITU-T V.24 Dimension(19inch rackmount) ² 433mm(L) ² 138mm(W) ² 44mm(H) Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I – DC-48V,range DC-36V~DC-72C option II – AC220V,range AC165V~AC240V Power Consumption: Environment condition Operating temperature: 0C~+50 C Storage temperature: -20 C~+70 C Relative temperature:95% (uncondensed)
Voice Phone Interface:
Send Inquiry to This Supplier
You May Also Like
-
12Slots 30 POTS Phone Fiber Multiplexer ChassisUS$ 250 - 280MOQ: 1 Unit
-
4Voice FXS/FXO Over Fiber, Phone Over Fiber MultiplexerUS$ 250 - 280MOQ: 1 Unit
-
Voice(FXS/FXO) Over Fiber,phone Over Fiber ModemUS$ 250 - 280MOQ: 1 Unit
-
16Voice Phone Plus 4Gigabit Ethernet Fiber MultiplexerUS$ 200 - 250MOQ: 1 Unit
-
One Channel 3G SDI Video Fiber Converter With LoopoutUS$ 150 - 200MOQ: 1 Unit
-
4 Channel Video Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
16channel Video Audio Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
8channel Video Over Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
128 Channel Video Fiber MultiplexerUS$ 200 - 200MOQ: 1 Unit
-
SDI Video Digital Fiber MuxUS$ 125 - 150MOQ: 1 Unit
