Contact Platform Support
Help Center360 POTS Phone Over Fiber Multiplexer
Related Products
-
5-Port Ethernet Switch, With DIP Switch, One-key Port IsolationUS$ 150 - 200MOQ: 1 Unit -
12Slots 30 POTS Phone Fiber Multiplexer ChassisUS$ 250 - 280MOQ: 1 Unit
-
4Voice FXS/FXO Over Fiber, Phone Over Fiber MultiplexerUS$ 250 - 280MOQ: 1 Unit
-
Voice(FXS/FXO) Over Fiber,phone Over Fiber ModemUS$ 250 - 280MOQ: 1 Unit
-
16Voice Phone Plus 4Gigabit Ethernet Fiber MultiplexerUS$ 200 - 250MOQ: 1 Unit
Ø 19” rackmout ,9U high chassis and easy for installation
Ø Can control the remote alarm status for option
Ø Ethernet is 10M/100M，full/half duplex adaptive, support VLAN；(optional)
Ø Network management for option
Ø ETH support Auto-MDIX；
Ø 1-360 channels phone, support call indication；
Ø Support each site puts the number to each other;
Ø Audio ports support FXO and FXS，FXO connected with switches，FXS with users’ phone；
Ø Can distinguish the opposite device is shut down or fiber not connected well 【Network management function】;
Ø User can become conscious of the temperature and voltage of the local device【Network management function】
Ø User can also become conscious of the temperature and voltage of the remote device , and can set the alarm threshold of the remote device temperature;【Network management function】
Ø Two power supply card support redundant for option
Optical wavelength: single mode 1310nm/1550nm Fiber: single fiber or double fiber for option Transmitting consumption: -9dBm/-5dBm Transmission range: 0-50Km/120Km for option Optical interface: SC/FC Receiving and dispatching module: >-6dBm Optical receiver receiving sensitivity Fiber circuit code: NRZ code FXS: Alarm voltage: 75V Alarmf requency: 25HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db FXO: Alarm detecting voltage: 35V Alarm detecting frequency: 17HZ-60HZ 2 line input impedance: 600Ω (hanging off) Wastage: 40db 10/100Base-T Ethernet Interface Rate: 10/100M, full/duplex auto-negotiation Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Entiries: 4096 Entiries Total Memory Sizes: 64MBits SDRAM Physical interface: RJ45, support AUTO-MDIX E1 Interface Interface standard: Conforms to G.703 standard Interface rate: N×64Kbps, N:1～32 Vibration characteristic: Satisfies G.742 and G.823 standard Transmission capacity: 1*E1 Clock type: internal-clock, route clock Connecter: BNC (75 Ω), RJ45 (120 Ω) Interface impedance: 75Ω(non- balanced), 120Ω (balanced) Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I – DC-48V,range DC-36V~DC-72C option II – AC220V,range AC165V~AC240V Power Consumption: Environment condition Operating temperature: 0C~+50 C Storage temperature: -20 C~+70 C Relative temperature:95% (uncondensed)
Send Inquiry to This Supplier
You May Also Like
-
One Channel 3G SDI Video Fiber Converter With LoopoutUS$ 150 - 200MOQ: 1 Unit
-
4 Channel Video Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
16channel Video Audio Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
8channel Video Over Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
128 Channel Video Fiber MultiplexerUS$ 200 - 200MOQ: 1 Unit
-
SDI Video Digital Fiber MuxUS$ 125 - 150MOQ: 1 Unit
-
2channel Switch Fiber Modem With DataUS$ 125 - 150MOQ: 1 Unit
-
1 Channel Video Fiber MultiplexerUS$ 125 - 150MOQ: 1 Unit
-
4 Channel CWDM MUX SystemUS$ 150 - 150MOQ: 1 Unit
-
CWDM Access SystemUS$ 150 - 150MOQ: 1 Unit
