integrate EOC master with GE media converter

Overview

BD-2EOC-2GE is the integrate EOC Master with two EOC master module and one Media Converter module.

The BD-2EOC-2GE EOC Master can provide high speed data service based on coaxial cable network. BD-2EOC-2GE built in a media convert, 10/100/1000Mbps media converter. The module supports IEEE 802.3, 802.3ab, 802.3u, 802.3z standards. It provide one SC/PC optical connector for 1000Base-Lx and four 10/100/1000M auto-negotiable Ethernet RJ45 interface. It can work with our MC head-end products and compliant with the third-party equipment.

The EOC Master Module is based the Qualcomm AR7410 chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.

The MC module connects with the EOC module, Ethernet data signals will be modulated into RF signals to transmit in the coaxial cable. BD-2EOC-2GE integrating EOC and MC can reduce the number of active node,  decreasing failure rate and saving a space. It is the best choice of LAN+EOC solution for the operator.

Function Features

• High integration with two EOC Master modules and one MC module

• Aluminum alloy die casting shaping, good heat dissipation

• Outdoor waterproof designed, 60V/220V power supply optional

• 7.5-65Mhz frequency for EOC signals., no influence on CATV Service

• Support broadcast storm limitation

• Support data packet statistics

• Support auto-update and auto-configuration

• Support On-line upgrading

• Support optical power measuring

• Flexible bandwidth allocation function

• Provide QOS for different service requirement

• Provide fault alarm function , easy for troubleshooting

• MC module is one standard media converter, provide different optical connector for different applicatio requirement

• Network management optional

• Compliant with the third-party equipment

• Support EMS based SNMP