Contact Platform Support
Help CenterFiber-1Voice+4E1+4FE+4RS232 Multiplexer
Related Products
Overview
This device provides 1Channel telephone， 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is very flexible.
Product Photo
Overview
This device provides 1Channel telephone， 1-4*Channel E1 interface, 4*Channel 10M/100M Ethernet interface (Wire Speed 100M) and 4 expansion interface. 4*Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, voice signal, 2/4 line E&M audio signal, switch signal, Ethernet signal (Bandwidth 2M). It is very flexible.
Features
Based on self -copyright IC
E1 interface comply with G.703, adopts digital clock recovery and smooth phase-lock technology;
Support FXO/FXS, EM2/4 audio, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone;
1channel Voice access, supports caller ID feature and reverse polarity billing functions
Support various sites mutual number allocation function
Provide 4 expansion interface, you can extend 1~4*Channel asynchronous data, such as RS232/RS485/RS422/Manchester code;
1~4*Channel voice, 1~8Channel switch or two/four line audio and so on
Ethernet interface supports10M/100M, half/full duplex auto- adaptable, support VLAN
4*Channel Ethernet interface is switch interface, support VLAN, can set to 4* channel logical isolation
Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable)
Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards.
The transmission distance is up to 2-120Km without interruption
AC 220V, DC-48V, DC24V can be optional
Fiber Multi-mode Fiber 50/125um, 62.5/125um, Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber, attenuation (3dbm/km)Wave Length: 820nm Transmitting power: -12dBm (Min) ~-9dBm (Max) Receiver sensitivity: -28dBm (Min) Link budget: 16dBm Single-mode Fiber 8/125um, 9/125um Maximum transmission distance: 40Km Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) Wave Length: 1310nm Transmitting power: -9dBm (Min) ~-8dBm (Max) Receiver sensitivity: -27dBm (Min) Link budget: 18dBm u E1 Interface Interface Standard: comply with protocol G.703; E1 Impedance: 75Ω (unbalance), 120Ω (balance); Jitter tolerance: In accord with protocol G.742 and G.823 Allowed Attenuation: 0~6dBm u Ethernet interface(10/100M) Interface rate: 10/100 Mbps, half/full duplex auto-negotiation Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability: 4096 Connector: RJ45, support Auto-MDIX u FXS Phone Interface Ring voltage: 75V Ring frequency: 25HZ Two-line Impedance: 600 Ohm (pick up) Return loss: 40 dB u FXO Switch Interface Ring detect voltage: 35V Ring detection frequency: 17HZ-60HZ Two-line Impedance: 600 Ohm (pick up) Return loss: 40 dB u EM 2/4 Line AD: 0dB DA: -3.5dB Two/Four-line Impedance: 600 Ohm Return loss: 20 dB u Working environment Working temperature: -10°C ~ 50°C Working Humidity: 5%~95 % (no condensation) Storage temperature: -40°C ~ 80°C Storage Humidity: 5%~95 % (no condensation) Specifications
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;
Send Inquiry to This Supplier
You May Also Like
-
E1 Fiber ModemUS$ 150 - 200MOQ: 1 Unit
-
16E1 Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
4E1 Fiber MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
8E1 PDH Optical MultiplexerUS$ 150 - 200MOQ: 1 Unit
-
16E1+8FE MANAGABLE FIBER MULTIPLEXERUS$ 200 - 200MOQ: 1 Unit
-
4E1+4ETH Managable Fiber MultiplexerUS$ 200 - 200MOQ: 1 Unit
-
8E1+4101001000 Gigabit Ethernet PDH Fiber MultiplexerUS$ 200 - 200MOQ: 1 Unit
-
16E1 4Ethernet Optical Fiber Multiplexer With LCD ManagementUS$ 200 - 200MOQ: 1 Unit
-
4Gigabit Ethernet+16E1 Fiber Multiplexer With Local ManagementUS$ 200 - 200MOQ: 1 Unit
-
8E1 Fiber Multiplexer,4Ethernet,Serial Data,Orderwire as OptionsUS$ 200 - 200MOQ: 1 Unit
